NiSi S6 150mm Filter Holder Kit with Pro CPL for Canon TS-E 17mm f/4L

Description

NiSi S6 150mm Filter Holder Kit with Pro CPL for Canon TS-E 17mm f/4L

Customised for the Canon TS-E 17mm f/4L lens, this NiSi S6 150mm Filter Holder Kit includes the S6 filter holder and a lens-specific threaded adapter ring that attaches the holder to the lens. The filter holder supports the included circular CPL and an optional 150mm rectangular filter. It supports one circular and one rectangular filter at the same time. The kit also includes a lens cap and a filter pouch that fits the entire kit.

NiSi S6 150mm Filter Holder Frame

This S6 150mm Filter Holder from NiSi features two filter slots for the convenient use of up to two 150mm wide, 2mm thick square or rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter’s edges, so contact with a filter’s front or rear-facing surfaces is avoided. Positioning filters is particularly important when using 170mm-long graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot. The S6 system allows the filter holder to rotate, and it has a lock to hold it in position. The filter holder supports the use of a rotating circular CPL.

Compatible with NiSi S6 150mm Filter Holder Kit

Filter holder only; requires S6 adapter rings

Holds two 150mm wide, 2mm thick filters

Compatible with 150 x 150mm and 150 x 170mm filters

Pull-and-release locking pin on the filter holder allows a reliable connection

Lock design locks the holder to an adapter ring

NiSi S6 150mm Filter Holder Adapter Ring for Canon TS-E 17mm f/4L Lens

The NiSi S6 Landscape NC CPL Filter is designed for use with a NiSi S6 150mm filter holder system. When screwed into a NiSi S6 150mm filter holder adapter ring, it can help to reduce reflections and glare by filtering out light that has become polarised due to reflection from a non-metallic surface. This results in a noticeable reduction of glare and reflections from non-metallic surfaces and an increase in the saturation of skies and foliage. It is constructed from glass for clarity and features an aluminium-alloy filter ring for durability while remaining lightweight.

Compatible with the NiSi S6 150mm filter system.

It can be screwed into a NiSi S6 150mm filter holder adapter ring.

Helps to reduce reflections and glare by filtering out light that has become polarised due to reflection from a non-metallic surface.

It is constructed from optical glass for clarity and features an aluminium-alloy filter ring for durability while remaining lightweight.

Clears up haze in distant landscapes and provides more saturated and vivid colours.

Strongest effect when used at a 90 angle from the sun.

Constructed from optical glass for clarity.

Nano-coating, waterproof coating, and low reflection are some additional features of the filter.

If using this with an older generation S5 adapter, the S6 holder frame must be used in combination.

It offers a saturation effect that is approximately 25% greater than a NiSi Pro CPL.

NiSi Protection Lens Cap for NiSi S5 & S6 150mm Filter Holder Kits

This NiSi Protection Lens Cap is designed to attach to a NiSi S5 or S6 150mm Filter Holder Kit’s adapter ring when the kit’s filter holder is removed. While in use, this lens cap can protect a NiSi S5/S6 circular polariser filter installed on the adapter ring while the adapter ring remains on a lens.

NiSi S6 150mm Filter Holder Pouch

This S6 150mm Filter Holder Pouch from NiSi provides a secure and convenient transport and storage solution for a NiSi S6 150mm filter holder kit. The pouch’s main compartment accommodates the kit’s adapter ring together with its filter holder, and a separate pocket can be used to hold the kit’s polariser filter or another separately available screw-in filter compatible with the adapter ring.

This durable and convenient filter pouch can be used to keep its contents protected and organised inside a larger bag or case. The rear of the pouch features a loop to allows it to be fastened to a camera bag or a tripod leg, putting the filter holder kit within more immediate reach. The interiors of this pouch’s main compartment include nonabrasive surfaces, and its exterior features a durable nylon construction. It has a hook-and-loop touch tab closure.

Holds NiSi S6 150mm Filter Holder System

Filter holder and adapter ring compartments

Hook-and-loop closure

Pocket for a polariser filter

Compatible with the previous generation S5 System and Q System

Key Features:

Supports 1 Circular/1 Rectangular Filter

S6 150mm Filter Holder Frame

Adapter for Canon TS-E 17mm f/4L

Circular CPL

Lens Cap

Pouch for Entire Kit

What’s in the Box:

NiSi S6 150mm Filter Holder Kit with Pro CPL for Canon TS-E 17mm f/4L