T-Motor VZ27x11 27×11 Matte Carbon Fiber Propeller, Flange Mount 10, for VTOL Fixed-Wing UAVs

Description

Overview

The T-Motor VZ27x11 is a VTOL propeller designed for VTOL fixed-wing UAVs in multicopter mode, combining aerodynamic design with composite construction for reliable thrust response and durability in demanding operating conditions.

Key Features

• High strength: Designed to withstand centrifugal loads and maneuver-induced alternating loads at high RPM to help prevent structural failure.
• High stiffness: Supports blade-tip clearance in compact layouts, suppresses aeroelastic deformation, and helps prevent flutter.
• Lightweight design: Reduced moment of inertia for rapid thrust response and higher flight control bandwidth.
• VTOL-oriented aerodynamics: Optimized for vertical takeoff/landing thrust and reduced profile drag when the propeller is not rotating during cruise.
• Transition stability focus: Designed to resist complex flow-field interference such as high angle of attack, asymmetric airflow, and periodic load variations.
• Composite process features: Bending & torsion resistant layup design; prepreg compression molding for integrated forming (product porosity below 1%); PMI foam core structure.
• Performance comparison notes (VZ Series): 30% flexural strength and 20% torsional stiffness (from comparative testing).

Specifications

Model	VZ27x11
Diameter (Inch)	27 (685.8mm)
Pitch (Inch)	11 (279.4mm)
Material	Resin-based Carbon Fiber Composite + PMI Foam Core
Surface Treatment	Matte
Average Single-blade Weight (g)	75
Type	One-Piece Straight Propeller
Recommended Max RPM (RPM)	6200
Recommended Max Thrust (kg)	22.4
Limit RPM (RPM)	6900
Limit Thrust (kg)	28
Connections & Dimensions	Flange Mount, 10 mm Center Hole, 20 mm Bolt Circle, with 4x 3 mm Mounting Holes
Application	VTOL Fixed-Wing UAVs, Multicopter Mode

Whats Included

• Propeller blades: CCW x1, CW x1
• Propeller cover plate (32*3mm) x2
• Socket head screws (M3*18mm) x8

Applications

• VTOL fixed-wing UAVs (multicopter mode)
• Industrial VTOL inspection platforms

For pre-sales fitment questions (motor matching, mounting compatibility) or after-sales support, contact [email protected] or visit https://rcdrone.top/.

Notes

• Appearance diagrams and product renderings are for reference only; the actual product shall prevail.
• Flexural strength and torsional stiffness improvements are derived from comparative testing between the VZ Series propeller and the G Series propellers.
• Bolt shear load data is sourced from simulation comparisons between installation bolts for the VZ Series propellers and those for the V Series propellers.
• Test data were obtained under specific conditions using equipment within the manufacturers laboratory; actual data and parameters may vary depending on environment, platform, software, and other factors.

Details

The T-Motor VZ27x11 matte carbon fiber propeller features a sleek black blade design with visible carbon weave for UAV builds.

The VZ27x11 propellers sculpted blade profile and pitch geometry are designed for efficient airflow on VTOL fixed-wing UAV setups.

The flange-mount hub design uses multiple bolts for a secure propeller installation on compatible UAV motors.

The VZ27x11 matte carbon fiber blade features a smooth, curved airfoil profile suited to VTOL fixed-wing UAV prop setups.

The VZ27x11 matte carbon fiber propeller uses a flange-mount hub with multiple bolts to secure the blade assembly on VTOL UAV builds.

A flange-mount hub secured with multiple bolts helps keep the carbon-fiber propeller firmly attached under load.

The propellers blade profile is shown with a velocity-magnitude airflow simulation to help evaluate how air moves along the surface.

A CFD airflow pathlines graphic helps visualize how air moves along the propeller blade profile.

The VZ27x11 propellers blade profile is modeled to visualize airflow streamlines and tip-vortex behavior for setup and analysis.

CFD airflow visualization supports evaluating propeller aerodynamics during VTOL fixed-wing UAV development.

The matte carbon fiber UAV propeller is secured on a fixture for precise measurement and quality inspection.

The VZ27x11 propeller uses a 10 flange mount with a 43 hole pattern on a 20 bolt circle for secure hub installation.

The VZ27x11 propeller set includes CW and CCW carbon fiber blades plus two 323 mm cover plates and eight M318 mm socket head screws for flange mounting.