Flywoo 0.4g Black Box OpenLager Nano Module 512MB SLC NAND + USB-C 3.0 BBITF USB Reader V1

Description

Overview

Flywoo 0.4g Black Box OpenLager Nano module (512MB) is a micro-drone flight data recorder module with onboard 512MB SLC NAND Flash storage and a BBITF USB Reader V1 using a USB-C 3.0 interface (backward compatible with USB 2.0). It is designed for space-constrained FPV and ultra-mini drone builds, with an ultra-light 0.4g module weight and compact dimensions of 14 x 7 x 3.5mm (module).

Key Features

• Lightweight design text shown: 7.1 x 13.8mm
• Ultra-light module weight: 0.4g
• Storage: 512MB flash (SLC NAND Flash)
• USB reader included; reader uses USB-C 3.0 (backward compatible with USB 2.0)
• Plug-and-play text shown
• Reader can be connected to computers (text shown: Readers linked to computers)
• LED status indication (red power LED; blue LED for detection/recording status)

Specifications

Storage	512MB SLC NAND Flash
Usable capacity	480MB
Interface	USB-C 3.0 (backward compatible with USB 2.0)
Voltage	4.5V
Dimensions (module)	14 x 7 x 3.5mm
Dimensions (reader)	18.2 x 15.4 x 6.2mm
Operating temperature	-10C to +40C
LED status	1. Red light: power light, always on when powered on 2. Blue light: Slow flashing: memory cannot be detected, use USB card reader to connect to computer to format Fast flashing: flight data recording
Log format	Betaflight Blackbox format (.BBL)
Logging duration (example shown)	~2 hours of high-frequency logging (at 2kHz) (depends on logging rate/settings)

Whats Included

• 1x Black Box module
• 1x BBITF USB Reader V1
• 1x black box & USB Reader connector cable
• 1x 4P-0.8mm 10cm cable

Setup Notes (from shown UI text)

• Betaflight Ports note shown: Note: not all combinations are valid. When the flight controller firmware detects this, the serial port configuration will be reset.
• Betaflight Ports note shown: Note: Do NOT disable MSP on the first serial port unless you know what you are doing. You may have to reflash and erase your configuration if you do.
• Example shown highlights selecting a UART peripheral as Blackbox logging with a value shown as 2000000.
• Blackbox configuration items shown include: Serial Port; 1/1 (2kHz); GYRO_SCALED; All selected; Save and reboot.

Applications

• FPV drone tuning and flight log recording for micro drones
• Betaflight / INAV blackbox logging and analysis (compatible with tools such as Blackbox Explorer)
• Works independently of FPV video system type (analog or digital)

For product questions, installation help, or after-sales support, contact [email protected] or visit https://rcdrone.top/.

Notes

• Not IP-rated (no official waterproof/dustproof rating stated).
• For harsh environments, the text provided recommends applying X30 nano-coating for added protection.

Details

Flywoos OpenLager Nano black box pairs with the BBITF USB-C reader for a compact, plug-and-play setup with 512MB onboard flash.

The OpenLager Nano module weighs about 0.4g, helping keep ultra-mini drone builds light and space-efficient.

The 512MB flash memory chip provides extra storage space for saving multiple sets of flight data.

The Blackbox module plugs into the flight controller with 4.5V, GND, TX2, and RX2 wiring and connects to the BB/TF USB Reader V1 for downloading logs to a computer.

Betaflight setup assigns Blackbox logging to the connected UART and lets you open the saved log file in Blackbox Explorer for review.