Slice Engineering Nozzle Torque Wrench

Description

Are you looking to buy Slice Engineering Torque Wrench in Australia?Walk into our store at Phaser FPV located on the Central Coast – Gosford NSW or buy online today.Compatible with all Slice nozzles. E3D and Bondtechnozzlescan be tightened with an adapter and socket.

• Specifically designed for changing nozzles
• 1.5 Nm torque provides correct seal to prevent leaking plastic
• Perfect tool for one-handed nozzle change when paired with The Mosquito Hotend
• Fits Vanadium Nozzles natively, with just enough wiggle room for that baked on plastic
• Fits other styles nozzles with off-the-shelf adapters

Annoying nozzle changes getting you down? Use the Nozzle Torque Wrench to wrench away your leaky nozzle woes. The rotary slip mechanism is set to 1.5 Nm, the exact torque you need to get that nice seal when tightening your nozzles, and uses a standard 1/4 drive.

Designed to fit the Slice Engineering Vanadium Nozzles without an adapter, as our nozzles have a 6 mm hex (thats a little under 1/4 for those that dont speak Metric), with a little wiggle room for that stubborn adhered plastic.

The Nozzle Torque Wrench will fit any other nozzles when used in combination with a hex-to-square drive adapter and appropriately sized socket.