Sale!
Tmotor Sanded Matte P-series Propellers for Multirotors

Tmotor Sanded Matte P-series Propellers for Multirotors

Original price was: $85.00.Current price is: $42.50.

SKU: R311035829892 Category:

Description

Basic Parameters

Item Specification Item Specification
Model 22 6.6 inch (558.8 mm 167.6 mm) Type Integrated Frame
Reference Single Blade Weight 45 2 g Material & Process Carbon Fiber + Resin
Maximum Static Thrust 11.5 kg Operating Temperature -40C ~ 65C
Optimal RPM Range 2800 4800 RPM Storage Temperature / Humidity -10C ~ 50C / < 85%
Surface Treatment Polished Surface

Propeller Specifications

Model (Diameter Pitch) Center Hole ID Mounting Hole Spacing (Diameter) Screw Specification Weight per Piece (Average) Optimal Operating Speed (RPM) Thrust Limit
82.7
(203.268.6mm)		 5mm 9mm (Dual holes) M2 4.10.5g – –
103.3
(25483.8mm)		 6mm 12mm (Dual holes) M3 8.11.0g – –
113.7
(279.493.9mm)		 6mm 12mm (Dual holes) M3 11.11.0g – –
124
(304.8101.6mm)		 6mm 12mm (Dual holes) M3 14.51.5g 5000~9000 4.0kg
134.4
(330.2111.8mm)		 6mm 12mm (Dual holes) M3 14.21.5g 5000~8000 4.5kg
144.8
(355.6121.9mm)		 6mm 12mm (Dual holes) M3 15.01.5g 4500~7500 5.0kg
155
(381127mm)		 6mm 12mm (Dual holes) M3 21.01.5g 5200~7000 6.0kg
165.4
(406.4137.2mm)		 6mm 12mm (Dual holes) M3 25.01.5g 4000~6000 7.0kg
175.8
(431.8147.3mm)		 6mm 12mm (Dual holes) M3 26.51.5g 3500~6000 7.5kg
186.1
(457.2154.9mm)		 6mm 12mm (Dual holes) M3 31.51.5g 3000~6000 8.2kg
195.7
(482.6144.8mm)		 6mm 12mm (Dual holes) M3 41.02g 3000~5000 9.0kg
206
(508152.4mm)		 6mm 12mm (Dual holes) M3 47.02g 3000~5500 10.0kg
216.3
(533.4160mm)		 6mm 12mm (Dual holes) M3 58.02g 2900~5000 10.8kg
226.6
(558.8167.6mm)		 6mm 12mm (Dual holes) M3 45.02g 2800~4800 11.5kg
247.2
(602.4198.1mm)		 10mm 20mm (Four holes) M3 56.02g 2400~4500 15.0kg
267.8
(660.4198.1mm)		 10mm 20mm (Four holes) M3 69.03g 1900~4000 18.0kg
278.1
(685.8205.7mm)		 10mm 20mm (Four holes) M3 83.03g 1900~3800 20.5kg
288.4
(711.2213.4mm)		 10mm 20mm (Four holes) M3 74.03g 1500~3700 23.0kg
298.7
(736.6221mm)		 10mm 20mm (Four holes) M3 92.04g 1400~3600 25.0kg
3010
(762254mm)		 10mm 20mm (Four holes) M3 93.04g 1800~3500 28.0kg

The product list is as follows:

Environmental Conditions

  • Operating Temperature: -40C ~ 65C
  • Storage Temperature: -10C ~ 50C
  • Storage Humidity: <85% RH (No condensation)

Precautions

  1. Propellers marked L rotate counterclockwise when used with a motor (viewed from the front); propellers marked R rotate clockwise when used with a motor (viewed from the front).

  2. Propellers are rigid structures. During high-speed rotation, contact with fragile or unprotected parts of the human body may cause severe injury. Use with extreme caution.

  3. The propeller structure has been sufficiently strength-tested. Please operate reasonably within the recommended maximum thrust range. Exceeding the maximum thrust limit may cause blade damage. Do not attempt to test blade strength by bending or similar methods, as the force conditions differ greatly from actual flight and may also cause damage.

  4. Before use, carefully check whether the propeller mounting screws are properly installed. The propeller must be securely mounted in place.

  5. Before each flight, check whether the mounting screws are tightened. If the propeller is damaged or cracked, there is a risk of blade fracturereplace it immediately.

  6. When storing propellers, avoid corrosive gases, harmful environments, temperatures exceeding -40C ~ 0C, and humidity above 80%. Pay special attention during long-term storage.

  7. When installing the propeller on the motor, be sure to apply medium or higher strength threadlocker to the mounting screws.

  8. Please comply with local laws and regulations when using this product.

Reviews

There are no reviews yet.

Be the first to review “Tmotor Sanded Matte P-series Propellers for Multirotors”

Related products