Colorfabb Varioshore TPU 1.75mm 700g

Description

Are you lookingfor ColorfabbVarioshore TPU in Australia?

Colorfabb has taken TPU and made it special by using the same foaming technology we debuted with LW-PLA. Colorfabbs varioShore TPU has a few main distinctive features: its variable shore hardness reduced weight and density and soft touch. varioShore TPU allows users to vary the density of the material by adjusting temperature and material throughput (speed & layer height). At temperatures between 200 and 250C the materials will start to expand to roughly 1.4-1.6 times its original volume. This means the material can be printed at low flow rates (60-70%), to compensate for the active foaming, which in return gives very soft printed parts. Between 190-200C the material can be printed without foaming, resulting in different haptics and harder prints compared to foamed samples.

Pros

• Light Weight
• Soft Touch
• Prosthetics

Cons

• color variations may occur. Color will turn lighter when the material is at maximum foamed state as opposed to non-foamed state which shows a deeper and richer color.

This is what our customers are saying about this material:
–Must have material for RC planes! Light, easy to print, can cut and trim, too
-“…LW-PLA, its perhaps the most ingenious 3D printer filament on the market.”
-So far I have used this for cosplay and the weight reduction is amazing
–…This filament creates strong, lightweight parts with great surface finish and it sands very well (better than normal PLA)
–I’ve been using this filament for various decorative prints to be worn, and the weight reduction is a real advantage!
-..Ideal for Dronereplacement parts

Colorfabb are the OG in premium and unique filaments and offers innovative and functional 3D printing filaments for niche applications. TheirLightweight LW-PLAis well known for 3D Printing RC planes as well as their uniqueVarioshore TPUandPA-CF LOW WARP. The colorFabb team is made up of dedicated professionals who are here to help you. Established in 2013, the colorFabb brand has been recognized as one of the frontrunners in the 3D printing industry.

Specifications

• Material: Colorfabb varioShore TPU
• Diameter Tolerance: 0.1 mm
• Density: 1,2-1,3 g/cm3
• Glass Transition Temperature: -20C

Printing Advice

• Adviced 3D printing temperature 190C-250C
• Adviced 3d print speed 20-30 mm/s
• Advised Heated bed 20-40C
• Cooling fan – Use the least amount of cooling when maximum foaming is required. For better overhang performance use 50-100% cooling.We advise our community to use standard TPU settings as a base setting for developing your own pre-sets. Make sure the distance between nozzle and platform is not to small, especially if the material is being foamed while printing, the pressure will need to be released from the hot-end to prevent clogging and feeder issues.

Downloads

TDSTechnical Datasheet colorFabb VARIOSHORE TPU

SDSSafety Datasheet colorFabb VARIOSHORE TPU Black&Safety Datasheet colorFabb VARIOSHORE TPU Natural

Browse more

• BrowseColorFABB
• Browse all ourFilament
• BrowseASA Filament
• BrowseABS Filament
• BrowseColour Changing Filament
• BrowseMatte Filament
• BrowseLuminous Filament
• BrowseNylon Filament
• BrowsePETG Filament
• BrowsePC Filament
• BrowsePLA Filaments(also PLA+)
• BrowsePVA Filament
• BrowseSilk Filament
• BrowseSLA Resin
• BrowseSpeciality Filament
• BrowseRainbow Filament
• BrowseTPU Filament
• Check out all our3D Printing Supplies