Aikon AK32PIN 4in1 20×20 35A 6S ESC (Without Heatsink) V2

Description

Are you looking to buy theAikon AK32PIN 20×20 4-in-1 35A ESC V2 Without Heatsink in Australia?

Aikon has found a way to make their larger ESCand fit it into a 20×20 form factor! With the latest BLHeli32 firmware, current sensor, ESC telemetry, and more, the AK32PIN is an advanced 20x20mm 4-in-1 ESC. This version doesn’t have the aluminium heatsink, to view that version see theAK32PIN 20×20 with heatsink here.

This ESC is over 5g lighter than its 30.5×30.5 relative and is still just as capable. Able to handle 6S up to 35A per channel, this ESC has more than enough juice to power most quads.

Features

• BLHeli_32 code base
• Programmable PWM frequency of up to 48KHz
• Auto-timing for higher efficiency and reliability
• Analog Voltage/Current sensing
• Adjustable Brake on Stop force
• Improve direction change in Bidirectional mode
• One current sensor to measure the total amp draw and telemetry functions.
• ESC Telemetry (Voltage and RPMs and current)
• Configuring from FC using DShot commands
• Programmable sine modulation mode
• Programmable soft bidirectional mode
• Programmable autonomous periodic (every 32ms) telemetry mode
• Hardware noise filter on the signal input

Specifications:

Includes

• 1x AK32PIN ESC
• 1x XT30 Pigtail
• 5x Mounting Gummies
• 1x 8pin Harness
• 1x 25v 330uf Capacitor

Browse more

• Browse all20x20 ESCs
• Browse all20x20 FPV Stacks
• Browse allFPV ESCs
• Browse allAIKON