Bondtech CHT BiMetal RepRap Coated Nozzle

Description

Are you looking to buy a Bondtech CHT BiMetal RepRap Coated Nozzle in Australia?

Copper and Hardened Vanadium Steel nozzle for high flow applications with abrasive materials.

Nozzle is supplied with Nickel Coating.

IncreasetheMax Volumetric Flowof your RepRap M6 style heat blockby 50%

They aremanufactured by Bondtech in-house,
and will fit the following blocks/printers:

• Mosquito / Magnum
• Mosquito Liquid
• Mosquito Magnum+
• Copperhead
• E3D Chimera and Kraken
• E3D V4, V5 and V6 blocks
• Prusa i3, Prusa Mini
• RepRap M6

Avoid Cold Change Of Bondtech CHT Nozzles

Heat up the heat block up to 280C, or at least above 250C, before removing or tightening any Bondtech CHT nozzle.Use at most 1.5 Nm torque.

Size limitation for fiber loaded filaments

For Carbon or Glassfiberloaded abrasive filaments use only 0.6, 0.8 and 1.0mm nozzle size.

For particle loaded filaments

For metal, wood, glitter or otherparticleloaded abrasive filaments you may use the 0.4mm nozzle size.

Bondtech CHT BiMetal RepRap Coated NozzleFeatures

• Copper body;
• Hardened Vanadium Steel inserts;
• Nickel Coating;
• 1 unit per pack;
• Available sizes : 0.40, 0.60, 0.80, and 1.0mm;
• Optimizedfor 1.75mm filament;
• Compatible with2.85mm filament.
• Requires 6mm wrench

Bondtech CHT BiMetal RepRap Coated NozzleAdvantages

• Abrasive-proof to work with Carbon and Glass fiber composite materials;
• Higher melt capacity by increasing the surface area of the heating walls
• Flow Rate gains between 25 and65%(check picture with test data)
• Competitive price/performance price
• Machined with ultra-precision
• Copper body and Hardened Vanadium Steel inserts nozzle with Nickel coated surface
• Follows nozzle standard:
  • RepRap M6 (M617.512.5)
• May be used with 1.75 or 2.85mm hotends.

Flow Rate gains may vary. Results depend on the hardware, materials and print settings used.

Browse more

• Browse all V6 Nozzles
• Browse all Bondtech
• Browse the CHT Nozzle