GEPRC Fettec G4 Alpha GF50A STACK

Description

The co-branded GEPRC Fettec G4 Alpha GF50A stack by GEPRC and FETTEC has been released. The FC features a G473 main controller, built-in FETTEC Alpha firmware, and S2M or Dshot2400 high-speed protocol with GF50A ESC to achieve exceptional stability and lightning-fast responsiveness. Additionally, the powerful FETTEC closed-source firmware and feature-rich software will elevate your FPV flight experience to new levels.

Features

• The flight controller uses FETTEC Alpah firmware, the ESC uses FETTEC firmware, and supports high-speed protocols such as S2M and Dshot2400.
• All flight control function interfaces support SH1.0 cable connection, which makes assembly without soldering wires more convenient.
• High-definition analog two-in-one socket, supporting DJI digital image transmission and analog image transmission
• The FC features high robustness to handle challenging situations, such as bent propellers caused by crashes, under harsh flight conditions.

Specifications

• ModelGEPRC Fettec G4 Alpha
  • MCUSTM32G473CEU6
  • IMUllM 42602
  • FirmwareFETTEC ALPHA
  • OSDFETTEC OSD
  • External buzzerYES
  • External LED YES
  • USB InterfaceTYPE-C
  • BEC Output9v@2A MAX 2.5A 5V@2A MAX 2.5A
  • Weight6.6g
• ModelGEPRC Fettec GF50A 4IN1 DShot2400 ESC
  • MCU: STM32G071
  • Continuous current: 50A
  • Peak current: 55A
  • Input: 2~6S (LIPO Battery)
  • Protocol: S2M+OW, S2M, Dshot300-2400
  • Galvanometer: YES
  • Firmware: FETTEC
  • Dimension: 32x32mm Board
  • Installation hole position: 30.5mmx30.5mm M4
  • Weight: 13g

Includes

• 1 x GEPRC Fettec GF50A 4IN1 DShot2400 ESC
• 1 x GEPRC Fettec G4 Alpha FC
• 2 x SH1.0-4Pin 100mm silicone wire
• 1 x SH1.0-6P to SH1.0-7Pin silicone cable 60mm
• 1 x SH1.0 8Pin 30mm silicone cable
• 1 x SH1.0 7pin to 6pin 80MM silicone cable
• 1 x XT60 power cable 110MM
• 1 x 35v 1000uf capacitor
• 4 x Hexagon socket screw M3*24
• 4 x Transparent color M3 nylon nut
• 10 x M3*8 damping ball
• 1 x Product manual

The DC structure better suitable for the O3 internal recording, as there are no propeller is visible during flight. While the X structure is more suitable for freestyle, though you are gonna see propeller is slightly visible during O3 internal recording.

Not fan of DC? well check out True X versioninstead and all ourGEPRC products!

Features

• The DC structure is suitable for O3 internal recording when no propeller is visible during flight, while the X structure is more suitable for freestyle when the propeller is slightly visible during O3 internal recording.
• Upgraded lens aluminum alloy side plate, durable and more visual impact
• Built-in Bluetooth, supports mobile phone wireless connection for parameter tuning
• Developed specifically for freestyle with a squashed X arm design.
• The HD version uses DJIs new O3 VTX, clear image, stable signal, low-latency, long-distance, and supports up to 4K/60fps recording
• SPAN G50A BLHeli_32 4in1 50A ESC with the latest GEPRC 2107.5 motor, with strong power, fast response speed, precise throttle control, and smooth flight experience
• Unique frame shock absorption design, less vibration, safe and stable electronic system operating environment
• With an independent capacitor and buzzer cabin, the operating environment of the whole drone is extremely stable, no shaking, no jitter
• Two kinds of 3D printing camera mounts are designed, which can be mounted with a full range of GoPro cameras, as well as Naked GoPro 8, Insta 360 GO2 and Caddx Peanut cameras. The shooting effect is stable and clear
• Add coral orange and emerald green colors to the O3 version to add more colors to your flight
• MARK5 O3 is optimized for freestyle, with a smoother flight experience

Specifications

• Model: MARK5 DC HD O3 Quadcopter
• Brand: GEPRC
• Frame: GEP-MK5D O3/GEP-MK5X O3
• Wheelbase: 225mm
• Top plate: 2.5mm
• Bottom plate: 2.5mm
• Arm plate: 5mm
• FC system: SPAN F722-BT-HD V2
• MCU: STM32F722
• Gyro: 42688-P(SPI)
• OSD: BetaFlight OSD w/AT7456E chip
• ESC: SPAN G50A BLHeli_32 4IN1 50A 4-6S ESC
• VTX: DJI O3 Air Unit
• Camera: DJI O3
• Propeller: Gemfan 5136
• Antenna: DJI O3 antenna
• Motor: SPEEDX2 2107.5-1960KV (6S Version) / SPEEDX2 2107.5-2450KV4S Version
• Weight: 426.0g (MARK5 DC HD O3 including 3D printed parts)
• Receiver: PNP, Frsky R-XSR, TBS Nano RX, ELRS 2.4G
• Recommended Battery: LiPo 4S 1300mAh-1800mAh (4S Version) / LiPo 6S 1050mAh-1550mAh(6S Version)

Includes

• 1x MARK5 DC HD O3 Quadcopter
• 4x Gemfan 5136 propellers
• 1x Battery strap M15x250mm
• 2x Battery strap M20x220mm
• 2x Battery Silicone Pads
• 1x 3D printed parts
• 1x Action cam mount holder
• 1x Set of screws
• 1x Set of screwdrivers
• 1x Antenna fixed tube

” data-mode=”questions” data-yotpo-element-id=”1″ style=”box-sizing: inherit; -webkit-font-smoothing: antialiased; text-size-adjust: none; -webkit-tap-highlight-color: rgba(0, 0, 0, 0); direction: ltr; clear: both; text-align: left; vertical-align: baseline; font-family: inherit; font-style: inherit; padding: 0px; margin: 0px auto; letter-spacing: normal; display: block; width: 1400px; background-color: transparent !important;”>

Browse More

• Browse All HD BNF
• Browse All BNF
• Browse All GEPRC