GEPRC GEP-M10 Series GPS Module u-blox M10050, 72ch, 10Hz, up to 32 sats, UART/I2C

Description

Overview

The GEPRC GEP-M10 Series GPS Module is an upgraded GPS positioning module line based on the u-blox M10050 chip. It supports GPS + BDS + Galileo + QZSS + SBAS joint positioning, with up to 32 navigation satellites, and offers 12 x 12 mm and 18 x 18 mm ceramic antenna options for improved reception. A built-in Flash chip and Farad capacitor help save configuration parameters and support fast hot start.

Optional onboard sensors include a QMC5883L or IST8310 magnetometer and a DPS310 barometer for azimuth/heading and altitude data. For product selection help or installation support, contact https://rcdrone.top/ or email [email protected].

Key Features

• u-blox M10050 (M10) chip solution
• GPS + BDS + Galileo + QZSS + SBAS joint positioning
• Up to 32 satellites, 72ch
• 10 Hz output frequency, 115200 bps baud rate
• 12 x 12 mm or 18 x 18 mm ceramic antenna versions
• Built-in Flash chip and Farad capacitor (stores configuration, supports hot start)
• Onboard indicator light
• Optional integrated magnetometer + barometer combinations

Specifications

GPS chip	u-blox M10050
Input voltage	3.3V-5V
Receiving frequency	GPS L1, GLONASS L1, BDS B1, GALILEO E1, SBAS L1, QZSS L1
Operating mode	GPS + BDS + GALILEO + QZSS + SBAS joint positioning
Channel	72ch
Navigation satellites	Up to 32 pieces
Output protocol	UART (ublox), I2C (Baro, Mag) (Ublox output; corresponding program needs to be created by the user)
Baud rate	115200bps
Output Frequency	10Hz
Speed Accuracy	0.05 m/s
Horizontal positioning accuracy	2D ACC 1.5m (Weather)
Timing accuracy	30 ns
Receiver sensitivity	Trace -162dBm, Capture -160dBm
Dynamic characteristics	Max Height: 50000m, Max Speed: 500m/s
Maximum acceleration	4G
Magnetometer (optional)	QMC5883L, IST8310
Barometer (optional)	DPS310
Size	15 x 15 x 5.5mm (GEP-M10nano), 22 x 22 x 8.2mm (GEP-M10)
Antenna size	12 x 12mm (GEP-M10nano), 18 x 18mm (GEP-M10)
Weight	2.5g (GEP-M10nano), 7.8g (GEP-M10)

Mag & Baro Options (by Model)

Model	QMC5883L	IST8310	DPS310
GEP-M10nano	–	–	–
GEP-M10	–	–	–
GEP-M10Q	Yes	–	–
GEP-M10-DQ	Yes	–	Yes
GEP-M10I	–	Yes	–
GEP-M10-DI	–	Yes	Yes

Wiring

• GEP-M10-DQ wiring labels: SDA, SCL, RX, TX, +5V, GND
• GEP-M10 and GEP-M10nano wiring labels: RX, TX, +5V, GND
• Flight controller connections shown: GND, +5V, RX, TX, SCL, SDA
• Note: The wiring method of GEP-M10Q, GEP-M10I, and GEP-M10-DI is consistent with GEP-M10-DQ.

Whats Included

• 1 x GPS module
• 1 x terminal wire
• 1 x GPS module instruction manual
• 1 x GEPRC sticker
• 1 x heat shrink tubing

Applications

• FPV quadcopters
• Multi-rotor models
• Fixed-wing models
• Other RC model products requiring GPS positioning

Notes

Barometer substitution: Due to DPS310 supply status, DPS310 may be replaced with DPS368. There are no differences in performance or usage between the two barometers, and old/new versions may be shipped randomly.

Antenna orientation: The antenna is marked THIS SIDE UP.

Details

GEPRC GEP-M10 Series GPS modules feature the M10 chip with options like magnetometer (IST8310/QMC5883L) and DPS310 barometer support.

GEPRC GEP-M10 Series GPS modules come in multiple sizes (M10, M10Q, M10-DI, and M10nano) and support magnetometer and barometer options for flexible builds.

GEPRC GEP-M10 Series GPS supports multimodal joint positioning across GPS, BDS, Galileo, QZSS, and SBAS, with stated horizontal accuracy within 1.5 meters.

The GEPRC GEP-M10 series GPS uses a u-blox 10th generation chip for fast positioning in compatible builds.

The GEPRC GEP-M10 GPS module uses an integrated design with optional QMC5883L or IST8310 magnetometer and a DPS310 barometer.

GEPRC GEP-M10 series GPS modules come in multiple board options with compact layouts and plug-in connectors for straightforward wiring.

GEPRC GEP-M10 Series GPS comes in 2222mm and 1515mm footprints for easier fitment on different builds.

GEP-M10 series GPS modules wire to the flight controller using GND and +5V plus RX/TX, with SCL/SDA used where supported.

GEP-M10 series GPS specifications list a u-blox M10050 chip, 3.35V input, UART/I2C output, and up to 10Hz update rate.

GEP-M10 series GPS variants differ by onboard sensors, with select models adding QMC5883L or IST8310 compass support and DPS310 barometer.

The GEP-M10 GPS module features a clearly marked antenna side-up orientation and labeled connector pads for straightforward wiring.

The GEPRC GEP-M10 series GPS uses a compact patch antenna with a clear THIS SIDE UP marking to help with correct mounting orientation.

The GEPRC GEP-M10 series GPS features a ceramic patch antenna and a compact board with a plug connector and PPS pad for clean wiring.