MAD TAURUS CM3115 FPV Drone Motor (490KV/900KV/1050KV) CM Series IP45 Dust Protection

Description

Overview

MAD TAURUS CM3115 is an FPV drone motor in the CM Series, designed for cinematic aerial photography and film shooting work. The CM Series focuses on dust protection and heat dissipation, including ultra-thin stainless steel dust screens inside the stator and a split exhaust blade inside the rotor.

Key Features

• IP45 protection design with ultra-thin stainless steel dust screens (motor perforation diameter < 1 mm) to help prevent foreign objects from entering.
• Split-type exhaust blade design to increase internal exhaust volume and reduce temperature during high-speed operation.
• Independent 12-blade high-efficiency centrifugal fan structure for active cooling.
• Cooling performance improvement: 10% (compared to motors of the same class).
• TC4 titanium alloy shaft (ultra-light semi-hollow), with weight reduced by 50% compared to standard steel shafts.
• Optimized for X8 coaxial configuration.

Specifications

Motor Data (Common)

Motor Model	MAD TAURUS CM3115 V1.0
Number of pole pairs	7
Stator	Anticorrosive
Varnished wire Degree	220C
Motor Size	D:37.1 52.8 mm
Magnet Degree / Motor Balance	150C
Propeller Mounting Holes	IN: 5 mm (M5 Nut)
Shaft Diameter	IN: 5 mm
Motor Mounting Holes	D:19 M34
Bearing	685*2
Cable Length	300 mm 18# Awg (Red/Black) silicone
Disruptive test	500 V

Mounting / Drawing Dimensions

Motor diameter	37.1
Motor length	52.8
Shaft thread	M5
Thread length	16.8
Mounting pattern	19 – M34

490KV (Energy Efficient) Specifications

RPM/V	490KV
No Load Current	0.72 A / 20 V
Motor Weight	105 g
Product Boxed Weight	231 g
Nominal Voltage	12S lipo battery
Internal resistance	112.5 m
Maximum Current	41.5 A
Maximum Power	1990 W
Maximum Torque	0.71 Nm
Maximum thrust	4.8 kg
Maximum temperature (shown)	94C
Optimized weight (shown)	105 g
Maximum thrust (shown)	4.1 kgf

900KV (Energy Efficient) Specifications

RPM/V	900KV
No Load Current	1.35 A / 10 V
Motor Weight	107 g
Product Boxed Weight	233 g
Nominal Voltage	6S lipo battery
Internal resistance	35.8 m
Maximum Current	63.2 A
Maximum Power	1517 W
Maximum Torque	0.64 Nm
Maximum thrust	4 kg
Maximum temperature (shown)	77C
Optimized weight (shown)	107 g
Maximum thrust (shown)	3.8 kgf

1050KV (Energy Efficient) Specifications

RPM/V	1050KV
No Load Current	1.9 A / 10 V
Motor Weight	108 g
Product Boxed Weight	236 g
Nominal Voltage	6S lipo battery
Internal resistance	21.6 m
Maximum Current	76.5 A
Maximum Power	1837 W
Maximum Torque	0.7 Nm
Maximum thrust	4.1 kg
Maximum temperature (shown)	106C
Optimized weight (shown)	108 g
Maximum thrust (shown)	4.1 kgf

Whats Included

Additional Accessories

M5 Nut 1, M3*8mm*8 Pan head Motor Screws, O-ring 1, Brass gasket 1, MAD Sticker*6

For product selection and compatibility support, contact [email protected] or visit https://rcdrone.top/.

Details

MAD TAURUS CM3115 motor sizing shows a 52.8 mm overall length, 37.1 mm body, and an M5 shaft for planning mounts and clearances.

The MAD TAURUS CM3115 CM series motor is positioned for cinematic aerial photography builds and X8 coaxial configurations.

The MAD TAURUS CM3115 motor features a black metal housing with a threaded shaft for secure prop mounting on FPV builds.

The MAD TAURUS CM3115 motor uses a 12-blade centrifugal fan design aimed at improving airflow for heat dissipation during operation.

The MAD Taurus CM3115 motor features an IP45 protection design with a fine stainless steel dust screen to help reduce debris ingress.

The MAD TAURUS CM3115 motor is presented for X8 cine drone builds where a coaxial layout and stable propulsion are a priority.

The MAD TAURUS CM3115 motor uses a TC4 titanium alloy shaft designed for improved durability and reduced weight.

The MAD TAURUS CM3115 motor is listed as 490KV and 105 g, with performance graphs and tables to help match props and batteries during setup.

The Taurus CM3115 900KV motor includes an efficiency curve and thrust tables for 6S setups to help compare prop and power combinations.

Details

The CM3115 FPV drone motor uses a 19mm M3 mounting pattern and an M5 shaft, with a 37.1mm body diameter and 52.8mm overall length for planning fitment.

The MAD CM series FPV motor is designed for cinematic aerial photography builds and mounts cleanly on standard quadcopter arms.

The MAD TAURUS CM3115 FPV drone motor features a black aluminum housing with a threaded shaft for straightforward mounting.

The CM3115 motor uses a 12-blade centrifugal fan and heat-dissipation design aimed at keeping temperatures stable during high-speed runs.

The MAD TAURUS CM3115 FPV drone motor features an IP45 protection design with visible mesh-style covers to help keep debris out.

The MAD TAURUS CM3115 is positioned as an X8 cinema-grade motor setup for stable, reliable FPV drone builds.

The CM3115 motor uses a threaded TC4 titanium alloy shaft for durable, secure prop mounting.

The TAURUS CM3115 motor datasheet lists 490KV rating, 105g weight, and performance tables to help with prop and setup selection.

The MAD TAURUS CM3115 900KV motor is listed at 107g and includes thrust and efficiency data tables to help with prop and setup choices.

The MAD TAURUS CM3115 is an energy-efficient 1050KV motor rated at 108g, with up to 4.1kg max thrust and 6S (max 1800W) support.