Description

HOBBYWING XERUN XR10 Justock G3SPECIFICATIONS

Brand Name: Hobbywing

Origin: Mainland China

Material: Composite Material

Recommend Age: 14+y

RC Parts & Accs: Motors

For Vehicle Type: Cars

Use: Vehicles & Remote Control Toys

Remote Control Peripherals/Devices: ESC

Model Number: DL-1087

Four-wheel Drive Attributes: Motors

Hobbywing Athlon XERUN XR10 Justock G3 Handout 60A Sensing Brushless ESC + Motor Male Set for 1/10 1/12 Off-Road Vehicles CLUB

Product Name: Hobbywing XERUN XR10 Justock G3 Handout

Product number: 30112004

type

Scale: 1/10th

Brushed/Brushless: Brushless

Feeling/No feeling: feeling

Waterproof: not waterproof

Hardware parameters

Continuous/peak current: 60A/380A

Number of battery cells: 2S Lipo

BEC output: 6V/7. .4V @ 4A continuously

Cables and Plugs

Power cord: black-14AWG-200mm+2

Output line: black-14AWG-200mm+3

Power plug: no plug

Output plug: no plug

fan

Dimensions: 25x25x10mm

Support voltage range: 5-7.4V

How to get electricity: get electricity from BEC

parameter programming

ESC’s own SET key: support

LED programming box parameter adjustment: support

LCD programming box parameter adjustment: support

WiFi Express Wireless Module: Support

OTA Programmer: Support

Programming interface: independent programming interface

firmware

Firmware online upgrade: support

Dimensions and Weight

Dimensions: 40 9×33.9×32.1mm

Weight: 75.4g (including wire weight)

application

Supported motor type: sensorless brushless motor / sensory brushless motor

Applicable models: 1/10, 1/12 RV and off-road vehicle, suitable for CLUB competition and entry-level practice for beginner players

Applicable motor KV value/T number: 10.5T 3650 motor

JUSTOCK Handout Spec

Product name: JUSTOCK Handout Spec 13.5T JUSTOCK Handout Spec 17.5T JUSTOCK Handout Spec 21.5T

Product number: 30408018/30408017/30408016

Scale: 1/10th

Brushed/Brushless: Brushless

Feeling/No feeling: feeling

Number of poles: 4

KV value: 3200KV /2600KV /2100KV

Support lithium battery section: 2-3S

No-load current (A): 2.7A /2.2A /1.7A

Outer diameter (mm): 36

Length (mm): 48.5

Shaft diameter (mm): 3.175

Weight (g): 147g /148.5g /148g

Front bearing: D11*D5*T5

Rear bearing: D8*D3*T4

Timing angle: fixed timing

Application: 1/10th STOCK Group Competition

Zero advance design RPM limit Highly consistent performance CONSISTENT POWER OUTP

This motor combo features an adjustable voltage range from 6V to 7.4V, offering broad adaptability. The maximum output current is 8 amps.

The XERUN XR10 Justock G3 features a built-in capacitor design, along with a reverse polarity protection circuit, and an ‘all-purpose’ independent programming port that is easy to use.

This ESC features an independent programming port that supports LCD and Over-The-Air (OTA) updates. Additionally, it can power extra fans for active air cooling.

Features a built-in capacitor, adjustable motor steering in both counterclockwise (CCW) and clockwise (CW) directions, and compatibility with various RC drift racing cars and trucks.

This motor features dual hall sensor ports and a robust design with large and small bearings for enhanced durability and reliability.

The XERUN XR10 Justock G3 features dual Hall sensor ports, with a reduced motor length of 48.5mm and a weight of only [insert weight]. This design improves the distribution of the center of gravity in the vehicle, resulting in a motor efficiency that is over 10% higher than the previous G2.1 version. This combination provides a better control experience for hobbyists.