BetaFPV HexaCharger 1S Battery Charger

Description

Get back in the air faster with the HexaCharger 1S Charger. This palmsized hub charges six 1S batteries at once, available in 24W and 78W Pro outputs for rapid PD 3.0 charging. With an easyread color display, dualport compatibility, and robust safety systems, its built to simplify charging and maximize flight time for whoop pilots of all styles.

Check out all our Chargers and the rest of our BetaFPV Products!

Palm-Sized & Portable

The HexaCharger weighs just 109g (Standard) or 115g (Pro), with a compact design that fits in your palmand it works with most common adapters for easy power on the go.

All-In-One Charging Hub

Fulfill all your batterymanagement needs with built-in charging, storage, and adjustable current settingsall controlled through an intuitive twobutton interface and clear color display.

Fast PD3.0 charging delivers up to 24W total for the HexaCharger or 78W total for the HexaCharger Pro, with the Pro supporting up to 3A max charging current and 400mA discharging current on all six ports simultaneously. Just press to start, then monitor all six ports and realtime status on the clear 1.3 TFT display. Dual BT2.0/PH2.0 ports ensure full compatibility with popular 1S whoop batteries.

Smart Cooling & Safety Design

Engineered for confidence, the HexaCharger features a foolproof physical design to prevent incorrect insertion, plus an active cooling system with a 9,000 RPM fan and alloy fins to dissipate heat during highpower operation. Intelligent thermal monitoring automatically adjusts power and halts operation if overheating occurs, ensuring safe, reliable charging every time.

Usage Notes

Charging Current

For optimal battery health and performance, set the charging current according to the recommended values in the chart below. Do not exceed the maximum current for your battery.

Capacity	280mAh	320mAh	480mAh	580mAh	680mAh	1100mAh
Recommended Current	0.5A	0.5A	1A	1A	1.5A	2A
Charging Time	33min	35.5min	28min	36min	30min	39min
Maximum Current	1A	1.5A	2A	2.5A	3A	3A
Charging Time	17min	15min	16.5min	17min	19min	30min

Charging Adapter

Power Adapter Recommendations

HexaCharger: Use a PD 3.0 adapter with at least 30W output.

HexaCharger Pro: Use a PD 3.0 adapter with 100W output or higher.

Adapter Compatibility & Behavior

• If the adapter cannot supply the requested charging current, the charger will reduce the current per port to stay within the adapters maximum power limit.
• If the charger detects that the adapter’s output is 5W (5V/1A), it will charge batteries sequentially by port number, while keeping the other channels off.
• If charger can only detects the adapter’s voltage but not the maximum current, power limit is unknown, * shown next to voltage. If the input voltage is below 5V, – shown next to voltage. No symbol if the adapter is providing full compatible power.
• If using a non-PD adapter, wait 5 seconds after powering on for the charger to recognize the protocol before starting to charge.

File: User Manual

Recommended Parts: Battery:LAVA II 1S Battery

Features:

• PalmSized & Portable: Weighs just 109g (Standard) / 115g (Pro) and fits in the palm of your hand.
• AllInOne Charging Hub: Charge, storage mode, and adjustable current settings all in one device.
• Easy to Use: Start, stop, and adjust settings with just two buttons, guided by a clear color screen.
• Fast PD 3.0 Charging: Delivers up to 24W total (Standard) or 78W total (Pro) for rapid, efficient charging of all six ports simultaneously.
• 1.3 TFT Color Display: Clear, zoned screen shows realtime voltage, current, and status for all six channels at a glance.
• Dual BT2.0 & PH2.0 Ports: Compatible with virtually all popular 1S whoop batteries.
• Smart Cooling System: Intelligent thermal management and highflow 9,000 RPM fan ensure safe and reliable charging.
• Physical Safety Design: Fool-proof ports prevent incorrect insertions.

Specifications:

	HexaCharger	HexaCharger Pro
Input	5V 3A Max~12V 2.5A Max	5V 3A Max~20V 5A Max
Charging Current	1A Max ( All Ports In Use) 3A Max (One Port In Use)	3AMax (All Ports In Use)
Charging Power	24W Max	78W Max
Supported Battery Type	LiPo/LiHV
Output Voltage	4.2V/4.35V
Storage Voltage	3.85V
Discharging Current	6400mA
Voltage Accuracy	0.03V
Input Port	Type-C
Charging Protocol	PD 3.0
Output Connectors	BT2.0/PH2.0
Dimensions	1065625.5mm
Operating Temperature	0~40
Weight	109g	115g

Package Includes:

• 1 x HexaCharger 1S Charger
• 1 x User Manual