Sale!
Holybro DroneCAN H-RTK F9P Helical (Based on NXP S32K1) - High-precision GPS GNSS Position With F9P BMM150 Compass NXP S32K14 Processor

Holybro DroneCAN H-RTK F9P Helical (Based on NXP S32K1) – High-precision GPS GNSS Position With F9P BMM150 Compass NXP S32K14 Processor

Original price was: $72.00.Current price is: $36.00.

SKU: QQ43326108283 Category:

Description

Overview

The DroneCAN H-RTK F9P (NXP S32K1) is the latest differential high-precision GNSS positioning system from Holybro. It has adopted the DroneCAN protocol for communication. It provides multi-band RTK with fast convergence times and reliable performance. concurrent reception of GPS. GLONASS. Galileo and BeiDou. and a fast update rate for highly dynamic and high volume applications with centimeter-accuracy.

With the adoption of the DroneCAN Protocol. it has up to an 8 Hz navigation update rate. upgradeability. noise immunity. real-time features. and is more robust than UART due to its increased resistance to electromagnetic interference. It does not occupy any serial port of the flight controller. and multiple CAN devices can be connected to the same CAN bus via a hub.

This S32K1 Based DroneCAN-F9P uses a u-blox F9P module. a BMM150 compass. and a tri-colored LED indicator. and is equipped with theNXP S32K14 processorwith 1MB Flash and 128 KB RAM. It is compatible with the open source Pixhawk series flight controller with both PX4 and Ardupilot.ThisS32K1 version uses PX4 CAN Node Firmware. andsupports PX4 Dronecan Firmware Updating.

Note: This version does not support Dual GPS or GPS heading at this moment. We are working to get this supported as soon as possible.

Features

DroneCAN F9P Rover
The Rover model has a flatter profile and stronger water resistance. It uses a dual band patch antenna and comes with an integrated cable to connect to the CAN bus. It excels in spaces where there are few obstructions.

You can find purchase link for this producthere
DroneCAN F9P Helical
This model uses a helical antenna. which has slightly better performance in space with obstructions than the Rover version. The antenna of this module can either be attached to the module directly or connected via a SMA cable. giving you the ultimate flexibility. It also has a UART2 port exposed. allowing you to do YAW/Heading (aka moving baseline).

You can find the purchase link of this producthere

This model can be used either on the rover (aircraft) or as a base station. However. when used as Base Station. RTK communicate with the Ground Control Station via USB. so the DroneCAN protocol is not used. You can consider using thestandard H-RTK F9P Helical or Basefor your Base Station.

Specification & comparison


 DroneCAN H-RTK F9P Rover DroneCAN H-RTK F9P Helical
Intended Application Rover (aircraft) only Rover (aircraft) or Base station
GNSS Receiver U-blox ZED-F9P high precision GNSS module U-blox ZED-F9P high precision GNSS module
Antenna Ceramic Patch Antenna with 20dB LNA Helical Antenna with 36dB LNA
Processor STM32G473 Available with STM32-G473 or NXP-S32k146
Magnetometer BMM150 BMM150
GNSS BeiDou. Galileo. GLONASS. GPS / QZSS BeiDou. Galileo. GLONASS. GPS / QZSS

Reviews

There are no reviews yet.

Be the first to review “Holybro DroneCAN H-RTK F9P Helical (Based on NXP S32K1) – High-precision GPS GNSS Position With F9P BMM150 Compass NXP S32K14 Processor”

Related products