Description

NewBeeDrone Hummingbird 200 RaceSpec Stack ELRS FC + 80A AM32 ESC 20x20mm

TheHummingbird 200 RaceSpec Stackis a purpose-built 20×20 flight stack designed from the ground up for competitive 5 FPV racing. Co-developed with professional racerKyle Buell (aka Twidgit)and tested rigorously over half a year of real racing conditions, this stack delivers the durability, precision, and simplicity that race pilots demand.

At the heart of the system is theHummingbird 200 Flight Controller, powered by a blazing-fastAT32F435 MCU at 288MHz, offering performance that surpasses even F722 processors. It features the highly respectedICM-42688 gyrowithdedicated LDO power, and a built-inUART-based ExpressLRS 2.4GHz receiverwithdual ceramic patch antennasand aTCXO oscillatorfor unmatched signal stability. This design eliminates the need for external receivers, simplifying builds and improving reliability during crashes.

Paired with the FC is theHummingbird 200 4in1 ESC, rated for80A continuous and 100A burst per channel, supporting 36S LiPo input. Built on a6-layer 3oz copper PCBwithblind vias and gold plating, this ESC is engineered to survive repeated abuse. It featuresthree massive onboard TVS diodesfor voltage spike protection andfour corner-mounted capacitor padsfor larger builds.

A standout feature is the3D reinforced motor pad designwith solderable surfaces on the top, bottom, and sideensuring rock-solid motor wire attachment that wont rip off even in hard crashes.

Priced at just$99, this stack shatters expectations, offering elite-level performance and racer-driven durability at a fraction of the market price. Built by racers, for racers.

Key Features

Flight Controller(Hummingbird 200 FC RS)

• AT32F435 MCU @ 288MHz faster than F722

• Built-in ExpressLRS 2.4GHz receiver (UART-based)
  Firmware target name(NewBeeDrone Diversity 2.4Ghz RX V2)

• • Dual ceramic patch antennas

  • TCXO oscillator for signal stability

• ICM-42688 gyro with dedicated LDO power supply –External clock sampling in BF4.6 reduces gyro noise, improves stability.

• NBD7456 OSD chip

• 10V 2A and 5V 2A dual BEC power outputs

• UART Layout:

  • UART1: Internal ELRS

  • UART5: Direct HDZero VTX plug

  • UART7: Free

• I2C and LED pad ready

• Mounting: 20x20mm (M2 or M3)

• Weight: 4.8g

ESC(Hummingbird 200 RS 4in1 ESC)

• Continuous Current: 80A per channel

• Burst Current: 100A (3s)

• Voltage Input: 36S LiPo

• AT32F421 MCU with integrated gate driver

• Firmware: AM32

• 6-layer, 3oz copper PCB with blind via and gold plating

• 2x onboard TVS diodes rated for 400W peak

• 3D motor pad structure (top + bottom + side solderable)

• Mounting: 20x20mm (M3 holes)

• Dimensions: 35x45mm (incl. pads)

• Weight: ~13.9g

Include:

FC:

• 1x Hummingbird 200 RaceSpec Flight Controller AT32F435 20×20 FC with Built-in ELRS 2.4GHz for FPV Racing
• 5x Grommets
• 1x DJI O3/O4 plug and play cable 100mm
• 1x SH1.0 8Pin 36mm for FC to ESC
• 2x 120mm silicon wire 4color cable

ESC:

• 1x Hummingbird 200 ESC RaceSpec 80A 2-6S AM32 20×20 Design for Extreme Racer
• 5x Grommet
• 1x 14awg Power cable
• 1x XT60 Plug
• 1x 8Pin 100mm Silicone Cable for FC Connection
• 1x 1000uf Capacitor
• 2x Tiny heat shrink for capacitor