MAD 6S 8Ah (8000mAh) Drone Solid State Lithium-ion Battery, 22.2V, 3C/5C, XT60H-F, Semi-Solid

Description

Overview

MAD 6S 8Ah drone solid state lithium-ion battery (semi-solid battery) designed for high energy density, reduced size, long service life, and improved safety for UAV/drone power systems.

Key Features

• Semi-solid electrolyte design with material and safety optimizations.
• Hard-pack, square and flat structure with fixed-position cable routing for a clean installation.
• Comprehensive pack protection: four 0.5mm thick FR4 fiberglass panels for lateral reinforcement, plus 2mm EVA shock-absorbing foam at the bottom.
• Cell/material innovation highlights:
  • Ionic conductor additives to improve ionic conductivity and high-rate performance under low electrolyte infiltration conditions.
  • Lithium source additives to improve first-cycle effect.
  • Double lithium-salt electrolyte formula designed for high/low temperature performance, cycle life, and rate performance.
• Design optimization highlights:
  • Material ratio adjustment (high nickel and lithium cobalt in the positive electrode; silicon in the negative electrode) to improve energy density while supporting safety and service life.
  • Optimized compaction density and particle size to reduce volume expansion in later cycles.
  • Auxiliary material weight optimization (e.g., tabs and aluminum-plastic film) to enhance cell energy density.

Specifications

Storage & Charging Precautions

• Keep away from flammable materials during storage.
• Do not disassemble or reassemble the battery pack.
• If the battery is damaged after charging, discontinue use and dispose of it responsibly.
• If odor, heat, discoloration, deformation, or other abnormal conditions occur during use/storage/charging, remove the battery from the device/charger and stop using it.
• Do not charge at a current greater than 2C.
• Use a qualified smart charger, and ensure supervision during charging.
• Keep away from flammable materials when charging; avoid overcharge.
• Prevent reverse polarity connection and short circuits.

For product selection and after-sales support, contact [email protected] or visit https://rcdrone.top/.

Details

MAD 6S 8000mAh semi-solid drone battery features a 22.2V 177.6Wh label and an XT60-style power lead for straightforward connection.

Technical data lists a 6S 8Ah (178Wh) battery with 22.2V nominal voltage, XT60H-F main plug, and 3C/5C discharge ratings.

Material innovation focuses on electrolyte and electrode additives designed to improve ionic conductivity and cell safety.

The semi-solid battery design emphasizes material ratio adjustment, optimal density, and added flame-retardant measures for improved safety.

The battery pack uses lateral reinforcement and EVA shock-absorbing foam at the bottom to help protect it from bumps and impacts.

The MAD 6S 8000mAh 22.2V pack uses fixed-position leads and an XT60H-F connector to keep wiring neat and consistent.

Battery storage and charging precautions outline safe handling, including using a qualified charger and avoiding overcurrent charging.