Description

Overview

STOP WASTING MONEY ON OVERHYPED ESCs!

MADMAX ESCs DONT CARE ABOUT YOUR LOYALTY TO LEGACY BRANDS.

Why paypremium pricesfor a competitorsmediocre 32-bit ESCjust because theyve been around longer?Wake up.

THIS IS WHAT REAL PERFORMANCE LOOKS LIKE:

Industrial-Grade 32-Bit Control Not just another “smooth” ESCruthless precisionthat dominates on the track.
Zero Compromise Reliability While others fail under pressure,MADMAX LAUGHS AT HEAT, DIRT, AND FULL THROTTLE.
Pro Features for Winners If youre still using thatoverpriced “big name” ESC, youre racing withlast-gen tech.

MADMAX ESCs: FOR THOSE WHO ACTUALLY WANT TO WIN.

Drop the fanboy excuses. Upgrade. Dominate.

Click the button below to DOWNLOAD the corresponding Mobile app program

Description

Instructions

Product Specifications:

Item	Description
Current	300A Continuous Current	Current control is similar to wave-by-wave current limiting which effectively limit peak current to avoid motor damage.
Power supply	6~16S LiPo	When using DC power supply instead of pure battery supply, its discharge and the power recovery capability must be considered. If the power supply capacity is limited, the operating parameters (such as acceleration and corresponding braking options, etc.) can be appropriately modulated.
Recommended motor	Sensor or sensorless square wave control of brushless motors
Motor speed	When the number of pole pairs is 1, the electrical speed is exactly equal to the mechanical speed. Others: Electrical speed = Mechanical speed Number of pole pairs = KV value Bus voltage Number of pole pairs Note: max electric speed 240,000rpm.	Speed of the motor is very high when idling. Stay safe.
BEC	Voltage: 6.0V/7.4V/8.4V, it can be switched through the mobile APP. Current: 10A continuously, 25A short-term
Fan	Temperature> 55, power supply to the fan turns on. Temperature < 50,power supply to the fan turns off. When there is a large current abnormality, the controller turns off the fan power supply	1. The fan powered by BEC 2. When a short-circuit current occurs to the fan, the power will be cut off. Power recovered in 1 second
Bluetooth	1. All parameters of the ESC can be adjusted by using the mobile APP 2. The ESC firmware can be upgraded by using the mobile APP 3.Motor operation data observation: data log and real-time data.
Dimension	127.50(L)*85.00(W)*59.50(H)mm / 782g (with wire)

_____________________________________________________________________________________________________________________________________________

Features:

2.1 Meticulously proved commutation scheme, smooth commutation even in noninductive.

2.2 Active freewheeling technology can reduce MOS heating while avoiding excessive current pulses.

2.3 Current limiting in each PWM cycle reduces the impact of pulse current on the motor.

2.4 Intelligent heat dissipation ensures the fan operates silently at low temperatures.

2.5 Built-in Bluetooth connections to mobile APP for hardware management and parameters setting.

2.6 Mobile APP data observation interface for viewing ESC recording data (static data) and real-time debugging data.

2.7 High-power DC conversion circuit makes BEC a potent loading capacity.

2.8 Full protection: low voltage, over voltage, throttle loss, abnormal braking, over temperature etc.

2.9 Turbo timing available.

2.10 No need to buy additional modules, you have a READY-TO-RUN speed controller.

2.11 Supporting XC BUS protocol, real-time control of ESC and reading of operation data through Bus. It can be used for robot control or other automated programming control.

_____________________________________________________________________________________________________________________________________________

Connections:

Precautions:

1. Please do not connect the ESC input wires DC+ and DC- in reverse. Reverse connection may damage the ESC
   If the ESC is damaged in this case, the relevant warranty service will not be provided.
2. If a Hall sensor is used, be sure to check the motor phase wires and Hall wiring.
3. For motors without temperature sensors, long-term high-power operation may cause burnout.
4. The mechanical structure of some motors cannot support high speed. If the speed is forcibly increased, the motor may be damaged.
5. If not used for more than 1 hour, it is recommended to unplug the power wires of the ESC.
6. If there are any modifications to the connection line, check the circuit carefully before putting in use. It is recommended to open the throttle slowly and confirm that there are no errors before advancing it normally

_____________________________________________________________________________________________________________________________________________

Start The Process:

Steps:

1. Check whether the circuit is open, short circuit or in poor contact.
2. Check whether the motor is stuck.
3. Plug in the power cable.
4. Turn on the power button.
When you hear the battery prompt tone (described in the “Normal Startup” prompt in the light/sound prompt section), the startup is normal. If the throttle is normal, you can
perform the throttle operation normally.

_____________________________________________________________________________________________________________________________________________

Set The Throttle Range:

_____________________________________________________________________________________________________________________________________________

Bluetooth:

The naming rule of Bluetooth name is “approximate model” + “-” + “ESC code ID”, for example, where “XC_E3-1C89”, XC_E3 is the approximate model, and “1C-89” is the hexadecimal
code ID of the ESC. Even if the user sets the Bluetooth name by himself, the ESC code ID is still retained to avoid two devices with the same name.

____________________________________________________________________________________________________________________________________________