Happymodel ELRS X1 AIO 2-4S F4 Flight Controller Built-in 12A 4in1 ESC SPI ExpressLRS 2.4GHz Receiver for Toothpick RC Drone FPV Racing

Description

Introduction:
TheELRSX1flightcontrollercomeswithintegratedSPI2.4GHzExpressLRSreceiverand12ABlheli_SESCwhichcouldsupport2-4s.
BiggerMosfetcouldsupporthighto12Acurrentswouldbebetterfor2-4StoothpickdroneorlongrangeFPVdrone.
Andbecausethe2.4GHzExpressLRSreceiverisequippedwiththeSX1280radiofrequencychipwithhighsensitivity,highpacketrateandlowlatency,thisflightcontrolleristheonethatallRace/Freestylepilotsneeded.
Theflightcontrollerreserved6pinSH1.0plugforCaddxFPVVistaHDVTXand5pinSH1.0plugforanalogVTX.
Notes:ELRSX1flightcontrollerwillworkwiththeELRS2.4GhzTXmodulewhichwasupdatedV1.0.0orlatestversionfirmware.SononeedtoflasholdRC3versionfirmwarefortheTXmodule. ( TX Module is not included, if you don’t have, you need buy addtionally)

Specification:

Brand Name: Happymodel

Model:ELRS X1

Item Name: F4 Flight Controller AIO 12A ESC ELRS Receiver

Flight Controller	MCU:STM32F411CEU6(100MHZ,512KFLASH) Sensor:MPU-6000(SPIconnection) Mountpattern:2020M2Size:32mm*28mm*9mm Powersupply:2-4SLipobattery Built-in12ABlheli_sESCeach Built-inBetaflightOSD(SPIControl) Built-inSPIExpressLRS2.4GHzreceiver Built-in5V1ABEC Flightcontrollerfirmwaretarget:CRAZYBEEF4SX1280
Onboard 12A BL_S 4in1 ESC	MCUupgradedtoEFM8BB21 Powersupply:2-4SLiPo/LiPoHV(7v/17v) Currents:12Acontinuouspeak15A(5seconds) SupportBLHeliSuiteprogrammable Factoryfirmware:F_H_40_REV16_8.HEX Defaultprotocol:DSHOT150/DSHOT300/DSHOT600
OnboardSPIExpressLRS2.4GHzReceiver	PacketRateoption:25Hz/50Hz/150Hz/250Hz/500Hz RFFrequency:2.4GHz Antennaplug:IPEX TelemetryoutputPower:<12dBm Receiverprotocol:SPIExpressLRS CouldbindwithELRS2.4GhzTXmodule(RecommendTXmodulewithlatestelrsfirmware)
OnboardvoltageandAmperagemeterssettings	Voltagemeterscalesetting110 Amperagemeterscalesetting470

BindProcedure:
1.PowertheflightcontrollerbyconnectingUSB.Pleasemakesurethattheportdriveroftheflightcontrolleriscorrectlyinstalledonthecomputer,thenopenBetaflightConfigurator(Latestversion)toconnect,entertothereceiverinterface,andthenclickBindReceiver,theredLEDatthebottomoftheflightcontrollerwillflashquickly,whichmeansthattheSPIELRSreceiverentersthebindmode.Thereisanotherwaytomakethereceiverenterthebindmode:afterconnectingtotheBetaflightconfigurator,movetotheCLIinterfaceandenterbind_rxinthecommandline.

2.Aftercorrectlyconnectingthe2.4GELRSTXmoduletoyourOpentxradiotransmitter,copythelatestversionofELRS.LUAfiletotheSDcardintheremotecontroller.ThedirectoryisSDCard/Scripts/tools,ThenrunELRS.LUAandupgradethefirmwaretolatestversionandclickbindwiththeSPIELRSreceiver.PleasemakesurethepacketrateisthesamebetweentheSPIELRSReceiverandyourELRSTXmodule.

ChangepacketratefortheSPIReceivercommandintheCLItab
Setexpresslrs_rate_index=3
Allowedrange:04
Defaultvalue:0
0=500Hz,1=250Hz,2=150Hz,3=50Hz,4=25Hz
3.Afterthebindingissuccessful,theRedLEDatthebottomoftheflightcontrollerwillgettingtobesolid,andthetelemetrycanbereceivedatthesametime.

4.ThemeaningoftheLEDstatusoftheSPIreceiver:theLEDisgettingtobesolid,indicatingthatthebindissuccessfulortheconnectionandcommunicationisnormal,theLEDflashingquicklyindicatesthatthereceiverisinbindingmode,andtheLEDflashingslowlyindicatesthatthethereisnosignalreceivedfromtheradiocontroller.
Sharethispost

Package Included:

1x ELRS X1 AIO Flight Controller Board

1x Cable Connector

2x T Antenna

4x plugs