Sale!
GOKU F405 HD 1S 5A ELRS AIO For DJI O4 V2 / WalkSnail / HDZero

GOKU F405 HD 1S 5A ELRS AIO For DJI O4 V2 / WalkSnail / HDZero

Original price was: $10.00.Current price is: $6.00.

SKU: LY822150023368 Category:

Description

Ultra-mini 1S HD camera compatible, STM32F405 MCU

Cross-shaped design fits all 1S frames , 2.6g

Onboard Flywoo O4 5V BEC

Integrated ELRS 2.4G receiver with TXCO for stable signal and low latency

Built-in ICM42688P gyro and 8MB black box

This Flywoo GOKU F405 HD 1S 5A AIO V2is tailored for ultra-micro 1S HD drones, building on V1s strengths with key upgrades.
At its core is theSTM32F405BGAmicro MCU, delivering 168MHz high-frequency performance, low power consumption, and a mere 2.6g weight. Its innovative cross-shaped design fits all 1S frame kits.
Key V2 upgrades: On-board Flywoo 1S O4 5V BECsupports a minimum operating voltage of 2.6V when paired with DJI O4 VTX. It matches V1 exactly in weight, performance, and shape for a seamless classic experience.
Also integrated are anELRS 2.4GHz receiver and TXCO(Temperature-Compensated Crystal Oscillator) for stable, low-latency signals. On-boardICM42688pgyro and8MBBetaflight black box enable flight data recording and analysismaking it an ideal choice for both pros and beginners building ultra-micro 1S HD drones

Highlights:

  • On board FLYWOO O4 1S 5V BEC module, it can achieve a minimum voltage of 2.6V.
  • Integrated Serial ELRS 2.4GHz receiver (with TCXO crystal oscillator for superior precision and stability)
  • STM32F405BGA aerospace-grade MCU (up to 68% faster processing vs. traditional F411 and 20% vs. G437)
  • Equipped with ICM-42688P gyro and 8MB Betaflight Blackbox flash memory
  • Ultra-compact, slim, cross-shaped PCB layout compatible with all popular 1S frames
  • Specifically optimized for 1S HD drone setups, including Walksnail, HDZero, and DJI O4 systems
  • Weighs just 2.6g without motor connectorsthe industry’s lightest 1S AIO solution
  • Pre-soldered motor connector

Specifications

Product Name GOKU F405 HD 1S 1S 5A AIO V2.0 w/TCXO ELRS
MCU STM32F405BGA
IMU ICM42688P
Barometer SPL06
Black Box 8M
OSD Support No
UART UART 3For ELRS),UART4,UART5(SBUS),UART
Protocols CRSF, SBUS, iBus, Spektrum
BEC BEC:5V 3.0A MAXSupport DJI O4 Air Unit
RX Flywoo TCXO EL24E 2400 RX 3.0.0
FC Firmware FLYWOOF405S_AIO
Dimensions 30.5 x 30.5mm
Mounting Holes Standard 25.5/25.5mm square to center of holes
Weight 2.6g
Product Name Onboard 4in1 ESC
Power input 1S Only
Current 5A continuous, 8A peak
ESC firmware O_H_5_48KHz_V0.19.hex Bluejay firmware
Digital signal protocol DShot300, DShot600
Motor Connector JST1.25
Battery connector A30

In the box :

  • 1x GOKU F405 HD 1S 5A ELRS AIO V2 (pre-soldered motor connectors)
  • 1x Flywoo ELRS 2.4g Minimortal PCB T Antenna UFL–40mm
  • 5x M2*6.6 Shock-absorbing ball
  • 1x shrink film
  • 4x Silica wire (Red/Black)
  • 1x A30 Power cable

Wiring diagram

Reviews

There are no reviews yet.

Be the first to review “GOKU F405 HD 1S 5A ELRS AIO For DJI O4 V2 / WalkSnail / HDZero”

Related products