MAD V8017 PRO IPE V1.0 170KV Feathering Propeller Autocenter eVTOL Drone Motor, 12S IP35

Description

Overview

MAD V8017 PRO IPE feathering propeller autocenter eVTOL drone motor with propeller is designed to automatically return to a horizontal position relative to the wing upon shutdown, supporting streamlined alignment.

Key Features

• Feathering propeller autocenter design for shutdown alignment
• Centrifugal heat dissipation: YES
• Anticorrosive stator
• Degree of protection: IP35

Specifications

Motor Data

Motor model	MAD V8017 PRO IPE V1.0
KV (RPM/V)	170KV
Number of pole pairs	14
Stator	Anticorrosive
Varnished wire degree	180C
Magnet degree	150C
Motor size	D: 88.5 46.2 mm
Degree of protection	IP35
Cable length	1000 mm 14# Awg (Black) silicone
Centrifugal heat dissipation	YES
Rotor balance	5 mg
Motor balance	10 mg
Shaft diameter	IN: 12 mm
Bearing	6901ZZ*2
Disruptive test	500 V

Mounting (Drawing Labels)

Motor mounting holes	D:40 M44 (also shown as 40-M4X4)
Propeller mounting holes	D:20 M34 (also shown as 20-M3X4); D:23 M44 (also shown as 23-M4X4)
Drawing dimensions shown	41.2; 5; 88.5; 8; 10; 6; 20; 3.1X4; 3; 30

Performance / System (170KV Image Data)

Recommended hover thrust	6.0~9.0 kgf
Maximum thrust (headline)	18.3 kgf
Optimized weight	790 g
Efficiency	>76%
Nominal voltage	12S Lipo battery
No load current	3.9A / 30V
Internal resistance	17.5 m
Maximum current	132.4 A
Maximum power	6325 W
Maximum torque	7.33 Nm
Maximum thrust (spec table)	21.4 kg
Recommended ESC	MAD AMPX 200A (5-14S)
Recommended propellers	27X8.1; 28X8.4
Product boxed weight	1118 g (150 x 150 x 65 mm)
UAV take-off weight	12S-28″/32kg – Quadcopter; 48kg – Hexacopter; 64kg – Octocopter
Single rotor take-off weight	6kg ~ 9kg

Note: Maximum thrust may depend on battery level, propeller type, air pressure, and other conditions. The analytical graph and tables were measured with an input voltage of 48 V at 25C and sea level. Listed operating values are theoretical values at 48 V for reference; current over 132 A is a non-working zone, 47132 A is short-term (about 1030 s), and below 47 A is a sustainable working zone.

Whats Included

• Motor x1
• Propeller plate x1
• Conversion x1
• 4.0 mm bullet connector x3
• Heat shrinkable tube x3
• M4*12 motor screws x4
• M3*14 propeller screws x4
• Sticker x2

Applications

• eVTOL and fixed-wing platforms requiring feathering/autocenter shutdown alignment
• UAV propulsion setups using 12S systems

For compatibility questions (ESC, propellers, mounting, or integration), contact [email protected] or visit https://rcdrone.top/.

Details

MAD V8017 PRO IPE V1.0 motor dimensions show a 41.2 mm body length with 40 and 68.5 profiles and M3/M4 mounting hole patterns for easier fit checks.

The MAD V8017 PRO IPE V1.0 motor comes with a propeller plate, conversion part, bullet connectors, heat shrink, and mounting screws for installation.

MAD V8017PRO 170KV motor documentation lists key figures like 790g weight, over 76% efficiency, and a 6090 kgf thrust range.