3DXTech TPU + GF30 FIBERX 60D Filament 1.75mm

Description

Are you looking to buy 3DXTech TPU + GF30 FIBERX 60D 1.75mm in Australia?

FibreX TPU+GF30 elastomer is an engineering-grade material that we chose based on its balance of printability, flexibility, chemical resistance, and toughness. 3DXFLEX TPU+GF30 has a hardness of 60D, allowing you to make very tough, impact resistant, flexible prints. We recommend direct-drive extruders, but experienced users can be successful with Bowden-type drives as well.

Benefits of FibreX TPU+GF30 (60D) Include:

• Shore 60D semi-flex hardness
• Ease of printing compared to similar flexible materials
• Excellent layer bonding
• Outstanding fatigue resistance
• Very low odor emitted while printing
• Low moisture absorption
• Retains flexibility even at low temperature
• Styrene and BPA free

Filament Specifications:

1.75mm and 2.85mm +/- 0.05mm in diameter

Recommended Print Settings:

• Extruder: 230-255C
• Bed Temp: 23-40C
• Heated Chamber: Not required
• Drying Instructions: 65C for 4 hours

Browse more

• Browse all 3DXTech
• Browse all Speciality Filament