Axisflying Argus PRO 55A/65A ESC 3-6S BLHeli 32Bit 96kHz IP54 CNC Aluminum Cover

Description

Overview

Axisflying Argus PRO 55A/65A is a 3-6S 32-bit ESC designed for the Argus PRO electronics ecosystem. It uses a full aluminum CNC cover to help protect the PCB (IP54 dust/splash protection) and improve heat dissipation for stable operation.

Key Features

• 3-6S ESC, BLHeli 32-bit, 96 kHz
• IP54-rated dust and splash protection (not for immersion or underwater use)
• CNC full aluminum cover to enlarge radiating surface for faster heat dissipation
• Large MOSFETs with low internal resistance and reduced heat generation (per provided description)
• Argus series positioning: Argus PRO uses an aluminum wrapped cover; Argus series is PCB-only electronics

Specifications

Argus PRO 55A / 65A ESC

ESC options	55A / 65A
Input voltage	3-6S
Firmware / processor	BLHeli 32-bit
PWM frequency	96 kHz
Dimensions	48.6*46.6*8.7 mm
Weight	32 g
Mounting	M3, 30.5*30.5 mm
Protection	IP54 (dust/splash); do not put into water or use underwater

Provided Argus F722 FC / system functions (for Argus PRO ecosystem compatibility)

The following items are included in the provided product information as Argus PRO system/FC functions (STM32F722 FC), and are not ESC-only specifications:

Flight controller	STM32F722
Gyro	BMI270
Blackbox	Flash 16MB
UART ports	6
BEC	5V @ 2A and 9V @ 2A
ESC sensor	Supported
Video	HD / Analog supported
LED-BZ	Supported
GPS	Supported
X8 PWM	Supported
Plug and Play	Supported
Motor outputs (FC)	Up to 8 (X8 build support)

For compatibility and setup questions, contact [email protected] or visit https://rcdrone.top/.

Applications

• 3-6S multirotor builds using the Axisflying Argus PRO ecosystem
• X8 configurations (when used with an Argus F722 FC that supports up to 8 motor outputs)

Details

The Argus PRO ESC uses a full aluminum cover for added protection against dirt and splashes and to help manage heat during builds.

The Argus PRO ESC uses a CNC aluminum cover and a compact MOSFET layout designed to help manage heat during demanding builds.

Argus Pro 4-in-1 ESC uses AM32 target firmware with 55A/65A rated current, 36S LiPo input, and 30.530.5mm M3 mounting.

The Argus PRO ESC is recommended to be installed right-side up, and if mounted face up you may need to reorder motors and set motor direction in Betaflight.

The Argus 55A/65A Pro 4-in-1 ESC kit includes an ESC-to-FC cable, XT60 power lead, 35V 470 capacitor, rubber rings, and an SH1.0 8-pin case for FC wiring.