Bambu Lab Support Filament for PA/PET

Description

Looking for Bambu Lab Support Filament for PA/PET in Australia?

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.

Recommended Printing Settings

• Drying Settings before Printing –80 C, 8 – 12 h
• Pringting and Keeping Container’s Humidity – < 20% RH (Sealed, with Desiccant)
• Nozzle Temperature – 260 – 290 C
• Bed Tempreature (with PVP Glue) – 80 – 100 C
• Printing Speed – < 100 mm/s

Physicial Properties

• Density – 1.17 g/cm
• Vicar Softening Temperature – N/A
• Heat Deflection Temperature – N/A
• Melting Temperature – 255 C
• Melt Index – 29.2 2.1 g/10 min
  

Mechanical Properties

• Tensile Strength – N/A
• Breaking Elongation Rate – N/A
• Bending Modulus – N/A
• Bending Strength – N/A
• Impact Strength – N/A

Attribute Comparison

1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.

Included

• 1x Filament 0.5kg & Desiccant
• 1x Filament Label

Browse more

• BrowsePrusamentFilament
• BrowseASA Filament
• BrowseABS Filament
• BrowseNylon Filament
• BrowsePC Filament
• BrowsePETG Filament
• BrowsePLA Filaments(also PLA+)
• BrowsePVA Filament
• BrowseSilk Filament
• BrowseSLA Resin
• BrowseSpeciality Filament
• BrowseTPU Filament
• Check out all our3D Printing Supplies