BetaFPV LAVA 2S/3S/4S 450mAh 75C LiHV Battery (2PCS) XT30, JST-XH2.54, 7.6/11.4/15.2V

Description

Overview

The BetaFPV LAVA 2S/3S/4S 450mAh 75C is a LiHV battery designed for high-current FPV flights, featuring Z-Folding Process cells and an XT30 connector. Nominal voltage options include 7.6V (2S), 11.4V (3S), and 15.2V (4S), with a max 75C discharge rate.

Key Features

• Z-Folding Process (vs. winding process): 5% higher energy density within the same volume.
• 75C discharge rate for higher burst output.
• Extended cycle life (as specified by the manufacturer).
• Z-Folding Process description: low internal resistance, efficient high-current discharge, and a 0.2V higher discharge platform under equivalent loads (manufacturer statement).
• Z-Folding Processed cells highlight: Energy Density, Capacity Density, Power Output, Thermal Management, Cycle Life.

Specifications

Compatibility / Applications

• 2S 450mAh 75C: Meteor85, Meteor85(HD), Pavo Pico
• 3S 450mAh 75C: Pavo20, Pavo Pico Frame
• 4S 450mAh 75C: TWIG XL, Pavo20 Frame
• Accessory: Pavo Series Battery Strap (2PCS)

Warning

• Please fully charge the new battery before use.
• Only use a charger designed for lithium polymer/Li-ion battery, and never leave the battery unattended during the charging process.
• Always keep the battery away from flammable and explosive materials while charging.
• Never overcharge the battery. The maximum voltage for a LiPo battery is 4.2V per cell, and for a LiHV battery is 4.35V per cell.
• Never discharge the battery to a level below 3V per cell under load.
• Do not store fully charged batteries for more than 3 days. For long-term storage, maintain the voltage between 3.8V and 3.9V.
• Do not disassemble, crush, short circuit, or expose to flame or other sources of ignition.
• Do not use batteries that are deformed or swollen.

Whats Included

• 2 LAVA 2S/3S/4S 450mAh 75C Battery

For compatibility or connector questions before purchase, contact [email protected] or visit https://rcdrone.top/.

Details

LAVA Series LiHV packs deliver a 450mAh capacity and up to 75C discharge for high-current FPV builds in 2S, 3S, or 4S.

Compact 2S sizing with XT30 discharge lead and JST-XH2.54 balance plug makes fitment easy on tight frames.

A provided 27A discharge report for the 3S pack helps estimate voltage behavior under heavy load.

Z-Folding processed cells are designed for low internal resistance and efficient high-current discharge.