Bondtech LGX ACE Magnum+ Hotend

Description

Are you looking to buy a Bondtech LGX ACE Magnum+ Hotend in Australia?

Designed for rigid and flexible materials with high flow and improved cooling capacity.

Main Advantages

• Enables Industrial level Volumetric Flow Rates;
• Supports rigid, flexible and soft materials;
• Prints flexible and soft materials faster;
• Easy to cool down and to install;
• It is a robust high-flow hotend;
• Allows for one-hand nozzle change.

ThisLGXACE add-on only supports 1.75 mm size filament.
No extruder, heater or thermistor are included.

Because it is necessary to install the heater(s) and thermistor(s) before assembling this hotend, it is supplied as a set of parts.

EachLGX ACEMagnum+ Hotend is supplied with:

• 1xLGXBlack Anodized Aluminum Monolithic Cold Block and Heat Sink
• 1x Magnum+ Heat Break
• 1x Magnum+ Hot Block
• 1x Bondtech M6x1x7.5 Coated Brass Nozzle 0.4mm
• 1x Boron Nitride Paste 5ml syringe
• 1x Arctic MX-4 Thermal Compound 2g syringe
• Mounting hardware:
• 4x 14.5mm Steel stand-offs
• 2x M1.5x16mm screws
• 2x M2 washers
• 6x M2.54 mm Screw with washer

By Bondtech and Slice Engineering

ThisLGX ACEMagnum+ is a specialshort filament pathhotend, co-developed by Bondtech and Slice Engineering, to be used with theLGXeXtruder.

It features Slices Mosquito Magnum+ bi-metallic heat-break technology and Copper industrial grade hot block for improved thermal performance and melt flow capacity.

Pairing it with theLGXforms an industrial grade print head that will excel atprinting ALL most common materialsand especially the soft and flexible.

Engineered To Give More Flow

During the long months of deep testing that preceded the launch of theLGX CHTnozzles, Bondtech discovered that shortening the post-drive filament path generates increased volumetric flow rate capacity. Similar to theLGX ACEMosquito , theLGX ACEMagnum+ delivers a significant increase when comparing to the full Mosquito Magnum+ hotend.

Designed To Be Cooler

TheLGX ACEMagnum+ Hotend features a monolithic air-cooled cold block and heat sink, designed and manufactured by Bondtech, that engages with theLGXextruder using its interface plug and rests at the front of the extruder. The heat sink includes the hole pattern for attaching 4040 fans.
Our tests suggest a 4010 fan is enough to cool down the cold block and the cold zone of the heat break, due to the monolithic design of the cold block and heat sink that increases heat transmission and dissipation.

Compatibility Alerts

TheLGXACE Magnum+ Hotend isnot compatiblewith the following items:

• 3DSolex Matchless 1.75mm nozzles.

Compatible nozzles

The hot block included in this product is compatible with the RepRap standard of nozzles.

Browse more

• Browse allHotends
• Browse allBondtech
• Browse allSlice Engineering