CubePilot Herelink Blue Bundle V1.1

Description

TheHerelink Blue V1.1 Bundleis an integrated remote controller, ground station, and wireless digital transmission system assembled and supported in the USA by NW Blue LLC. Compatible with Cube Autopilot, Ardupilot, and PX4, it delivers RC control, HD video, and telemetry up to 20km, featuring an 8core SOC, enhanced 1000nit display, and expanded connectivity with Ethernet and SD card support on Air Unit v1.1.

Check out all ourVTXs as well as the rest of our CubePilotselection!

Features

• Integrated remote controller, ground station, and HD video transmission system
• Compatible with Cube Autopilot, Ardupilot, and PX4
• Long-range transmission up to 20km
• Air Unit and Controller with 8-core SOC for custom applications
• Enhanced display (1000nit) with Ethernet and SD card support on Air Unit v1.1

Specifications

• Processor: SoC Pinecine S1
• CPU: 4 Cortex A53, 2.2GHz / 4 Cortex A53, 1.4GHz
• GPU: 4-core MaliT860
• SDR: A7 + DSP
• Memory: Air Unit LPDDR3 1GB | Controller LPDDR3 2GB
• Storage: Air Unit eMMC 4GB | Controller eMMC 8GB
• Transmission Distance: FCC 20km | CE / SRRC / MIC 12km
• Video Delay: 110ms
• Image Resolution: 720p @30fps | 1080p @30/60fps
• Frequency Band: 2.4GHz ISM
• Receive Sensitivity: -99dBm @ 20MHz BW
• Recovery Time: < 1s

HERELINK BLUE CONTROLLER

• Case Material: 6061 Aluminum with Cerakote coating
• Weight: Herelink Blue 1.0 961g | Herelink Blue 1.1 725g (including 2 antennas)
• Size: 240 110 40mm (not including external antennas and joysticks)
• Screen: 5.46inch, 1080P, 16million colors, capacitive touch
• Screen Brightness: Herelink Blue 1.0 600nit | Herelink Blue 1.1 1000nit
• Audio: Built-in speaker 1, built-in microphone 2
• Remote: Hall effect gimbals with removable sticks 2, scroll wheel 1, bottom buttons 6 with backlight, top button 1 (right)
• Wireless Communication: Bluetooth / WiFi / 2.4GHz map transmission ground / 5.8GHz WiFi
• Indicator Light: Tricolor LED 2 (upper right and left corners)
• Interface: MicroUSB 1, Micro SD 1 (supports up to 64GB)
• External Antenna: Omnidirectional antenna (3dBi) 2, detachable
• Built-in Antenna: Built-in WiFi antenna
• Power: Built-in 4950mAh LiPo battery
• Charging: Supports micro USB 5V, 2A current charging
• Power Consumption: Average 4W (picture transmission only, medium screen brightness, WiFi off, GPS off)

HERLEINK BLUE AIR UNIT V1.1

• Case Material: 6061 aluminum with Cerakote coating
• Weight: 68g
• Dimensions: 78 30 17mm
• Signal Bandwidth: 20MHz / 10MHz
• Power Consumption: Average 4W
• Power Input: Recommended ~7V (min 6V, max 12V); avoid sharing BEC with servos
• Power Output: 200mW (stock)
• Micro HDMI 1: Camera video signal input (recommended)
• Micro HDMI 2: Camera video signal input
• UART Interface: 3.3V UART
• S.Bus Interface: Dual RC out (S.Bus1 and S.Bus2)
• Micro USB: Debugging and firmware upgrades; supports OTG (no external power needed)
• Button: Pairing and state reset
• Indicator Lights (1 & 2): Pairing and video transmission status
• MMCX Antenna Jacks (1 & 2): Signal transmission and ground communication
• SD Slot (Air Unit 1.1 only): For future usage
• ETH Interface (Air Unit 1.1 only): Network protocol device access

Links

• NW Blue Herelink Blue V1.1 Manual
• NDAA / 889 Certification

Includes

• 1x HereLink Air Unit
• 1x HereLink Controller
• 2x Omnidirectional antenna
• 1x GPS antenna
• 2x Airunit antenna
• 2x Joy-stick
• 1x HDMI cable
• 1x Power cable
• 1x Telemetry cable
• 1x S.Bus cable
• 1x Ethernet cable
• 1x USB cable
• 1x Fan (available in Herelink Blue v1.1)
• 1x Air Unit mounting plate
• 8x Silicon o-ring
• 4x M1.6 16mm screw
• 4x M1.6 3mm screw
• 4x M1.6 washer
• 2x M3 10mm screw
• 2x M3 nut
• 1x Neck lanyard
• 2x Neck lanyard clips
• 1x Wall charger
• 1x Waterproof storage case