Sale!
Flashhobby BLS3858MED 58KG 8.4V Brushless Digital Servo, 14Bit Magnetic Encoder, IP67 CNC Case

Flashhobby BLS3858MED 58KG 8.4V Brushless Digital Servo, 14Bit Magnetic Encoder, IP67 CNC Case

Original price was: $209.00.Current price is: $104.50.

SKU: BVHB1865370438 Category:

Description

Overview

The Flashhobby BLS3858MED is a high-torque programmable brushless digital servo (6.08.4V DC) featuring a 14Bit magnetic encoder, CNC aluminum case, and IP67 waterproof level. It supports multiple control modes including Sanwa SSR/SUR, Flysky NB4 SFR, and Futaba SR.

Key Features

  • Programmable PWM digital amplifier
  • 32-bit MCU with 14Bit magnetic encoder
  • Brushless motor, MOS drive
  • Steel gears and high-precision gear train
  • Dual ball-bearing supported output shaft (2BB)
  • 25-tooth output spline
  • Wide operating voltage: DC 6.08.4V
  • Diamond-cut aluminum heat sink shell; full CNC aluminum case
  • Water resistant and waterproof case (IP67)
  • Soft start function: included

Programmable Functions

  • End point adjustments
  • Direction
  • Fail safe
  • Dead band
  • Speed (slower)
  • Soft start rate
  • Overload protection
  • Data save / load
  • Program reset

Specifications

Model BLS3858MED
Control system PWM control (1500usec in the central point)
Signal type Digital control
Operating voltage range DC 6.08.4V
Refresh rate Compatible 50Hz1000Hz
Pulse width 500 to 2500 usec
Operation temperature range -20C to +70C
Operation travel 180 5
Programmable angle Yes
Direction CW
Driver type Mos Drive
Motor type Brushless motor
Angle sensor 14Bit magnetic encoder
Gear Steel gears
Ball bearing 2BB
Case material Full aluminum CNC (CNC AL6061 aluminum case)
Waterproof level IP67
Dimensions 40 x 20 x 38 mm
Weight 80 g (without servo horn)
Output spline 25-tooth
Mode compatible Sanwa SSR/SUR; Flysky NB4 SFR; Futaba SR
Connector wire 22AWG 260 mm JR
No-load lifetime (circle) > one million times without load
Stall/standing torque @ 6.0V 42.0 kg-cm (583 oz-in)
Stall/standing torque @ 7.4V 49.0 kg-cm (680 oz-in)
Stall/standing torque @ 8.4V 58.0 kg-cm (805 oz-in)
Operating speed @ 6.0V 0.17 sec/60
Operating speed @ 7.4V 0.14 sec/60
Operating speed @ 8.4V 0.12 sec/60
Running current @ 6.0V 4800 mA
Running current @ 7.4V 5500 mA
Running current @ 8.4V 6500 mA
Dead band width 2 uSec

Whats Included

  • Flashhobby BLS3858MED servo
  • Accessory pack (servo horns/arm and mounting hardware)

For installation and compatibility questions, contact support at [email protected] or visit https://rcdrone.top/.

Details

Flashhobby BLS3858MED brushless digital servo features a metal CNC-style case and is labeled 58KG, 8.4V, magnetic, and IP67.

Flashhobby BLS3858MED brushless digital servo features an IP67 water-resistant case and standard mounting dimensions for easier fitment.

The Flashhobby BLS3858MED servo features an IP67-rated aluminum heat-sink shell and is labeled compatible with Sanwa SSR, NB4, and Futaba modes.

The Flashhobby BLS3858 servo uses a 25-tooth output spline and comes with servo horns and mounting hardware for straightforward installation.

Flashhobby BLS3858MED brushless digital servo is rated for 6.08.4V operation, IP67 waterproofing, and a 402038mm footprint.

Reviews

There are no reviews yet.

Be the first to review “Flashhobby BLS3858MED 58KG 8.4V Brushless Digital Servo, 14Bit Magnetic Encoder, IP67 CNC Case”

Related products