Flywoo FlyLens 85 HD 2S Walksnail Brushless Whoop FPV Drone V1.3 w/ GOKU F405 HD ELRS AIO

Description

Overview

The Flywoo FlyLens 85 HD 2S Walksnail is a brushless whoop FPV drone featuring a lightweight, compact 2-inch platform with a high-strength PC injection-molded protective ring and a three-point CNC camera damping platform. It uses a reverse thrust (downward thrust) power design and a downward-mounted VTX module compartment to improve protection and heat dissipation.

Published weight information includes: take off weight 80~130g (varying based on different versions) and weighing less than 249g.

Key Features

• Three-point CNC camera damping platform designed to reduce jelly-like effect and improve video stability.
• High-strength PC injection molding protective ring with embedded colorful neon light strip (remote control switch).
• Quick-release upper and lower structure design; frame fixed with only four screws for easier maintenance.
• Quick-release battery compartment; two reserved fixing holes (front/back) for adjusting flight center of gravity.
• Reverse thrust power design with downward placement of VTX module compartment for protection and enhanced heat dissipation.
• Carbon fiber frame with surface black carbon treatment.
• Reserved mounting holes for action camera installation; optional 12mm GPS mounting kit mentioned.
• GPS expansion supported via Goku GM10 Nano V3 module (default version does not come with GPS; DIY soldering/installation required).

Specifications

Model	FlyLens 85 HD Walksnail 2S Brushless Whoop FPV Drone
Frame	FlyLens 85 Standard Frame kit
Electronics	GOKU F405 HD 1-2S ELRS AIO V2 (42688)
Flight Controller / ESC (table)	GOKU Versatile F405 1-2S 12A AIO
Gyro (AIO feature text)	ICM42688
Transmission (VTX)	Walksnail Avatar HD Mini 1S VTX w/ Heatsink
VTX notes (provided)	Average latency 22ms; onboard DVR; 5.8GHz; 8Gb internal storage; switchable aspect ratio
Camera	Walksnail Avatar HD Nano Camera
Motor	ROBO 1003 14800KV
Propeller	2015 2-Blade Propeller
VTX Antenna	Flywoo 5.8G Light 5.8G 3dBi Brass Antenna UFL
LED	Flywoo Flexible LED + 3.3V BEC 2.7mm
Battery Plug (table)	XT30
Recommended Battery (table)	Explorer 2S 750mAh/1000mAh HV
Product Size	128mm x 128mm; height 55mm

Performance (table)

Version	Take off thrust	Flight Time	Frame Kit (No battery)	Flight Speed
Flylens 85 walksnail	25% (2S 750mAh), 27% (2S 1000mAh)	7:00, 9:00	70.0g	75 KM/H

Additional table notes: GPS: SUPPORT. LED switch: REMOTE CONTROLLER.

Version Updates (V1.3)

• Using the FlyLens 85 V1.3 Frame kit: added support for 9mm x 9mm motor mounting holes; reinforced camera mounting holes for the bottom plate; optimized width between motor mounting holes and periphery; original Micro-USB port compatible with Type-C; HD VTX bracket uses new materials (very tough).
• GOKU F405 HD 1-2S ELRS AIO V2 updates: new 9V BEC added; new electronic switch to turn off O3 air unit during BF tuning (to help prevent overheating damage); new Type-C interface added.

Whats Included (table)

• Flylens 85 x1
• 2S 750mAh TPU mount x1
• 2S 1000mAh mount x1
• Propeller x4
• Gasket x2
• Locknut x2
• Shock absorbing balls x2
• Clip x4
• Hex nut x2
• Hexagonal stud x2
• M1.4 x 3.5mm screws x12
• M1.6 x 6mm screws x4
• M2 x 3mm (rhs) screws x2
• M2 x 6mm (rhs) screws x1
• M2 x 10 (Flat Head) screws x2
• M2 x 10 (rhs) screws x2
• M2 x 12 (Flat Head) screws x2
• M2 x 18 (Flat Head) screws x2

Applications

• Brushless whoop FPV flying with Walksnail HD video transmission
• HD video capture using a CNC-damped camera mounting platform

Manuals

FlyLens 85 resource/download center: https://flywoo.net/page/flylens-85-drone-download-center

For product selection and setup support, contact [email protected] or visit https://rcdrone.top/.

Details

Flywoo FlyLens 85 combines a ducted PC protective ring, three-point camera damping mount, and a sub-249 g build for tighter indoor flights.

Flywoo FlyLens 85 HD 2S is promoted as an extreme-lightweight whoop with a stated 80130 g takeoff weight depending on version.

The Flywoo GOKU F405 AIO setup supports 2S power with 12A continuous output and includes an ICM42688 gyro plus built-in ELRS 2.4G UART.

The FlyLens 85 HD platform supports multiple FPV video transmission systems, including Walksnail, HDZero, DJI O3, and analog setups.

The FlyLens 85 HD uses a three-point CNC damping camera mount to help reduce vibration and keep footage more stable.

The FlyLens 85 whoop frame uses a high-strength protective ring with an embedded colorful neon light strip for added visibility.

The quick-release frame uses four screws for easier maintenance, with a quick-release battery mount to help tune the center of gravity.

The FlyLens 85 HD uses a reverse thrust power design with a downward VTX module compartment to help protect components and support heat dissipation.

The Flywoo FlyLens 85 frame includes reserved mounting holes for an action camera and supports multiple thumb-style camera mounts.

FlyLens 85 supports adding GPS later with the Goku GM10 Nano V3 module via its external serial ports, with DIY soldering and installation required.

The FlyLens 85 Walksnail setup pairs a GOKU Versatile F405 12S 12A AIO with a Walksnail Mini 1S VTX and Walksnail Avatar V2 camera, using an XT30 battery plug.

FlyLens 85 Walksnail is listed at 70.0 g (no battery), up to 75 km/h flight speed, and around 7:009:00 flight time on 2S 1000mAh packs.

Flywoo FlyLens 85 accessory pack includes TPU battery mounts, propellers, gaskets, nuts, clips, shock balls, and assorted M1.4/M2 screws.

FlyLens 85 HD uses a compact 128mm x 128mm frame with an overall height around 55mm for tight whoop builds.