Fully Waterproof Light Weight Efoil Kits foil boost kit with MTI65162 Motor + 160A waterproof ESC + 1905WF waterproof Remote + MTS2009AS Switch

Description

Maytech Fully Waterproof Light Weight Efoil Kits foil boost kit with MTI65162 Motor + New 160A waterproof 32Bit ESC + 1905WF waterproof Remote + MTS2009AS Switch

Noted please: max voltage can use for this kit is 12S 50V.

Wiring diagram and parameters display on remote:

If you want to display RPM and battery power bar and voltage %, please follow:

The ESC firmware had been updated since Aug, 2025.

Remote can display Voltage, RPM, Current by connecting TX and RX cable on receiver.

Settings in remote and Wiring for this kit:

1)Thr Mode:	Surfboard
–5) and 6) Batt Type and Batt Ser Num	Please set according to your battery.
9) Data Source	MTSESC-WP32
10) M.Pole Pairs	10
12) Gear Ratio	1.0

1. MTSF160A-WP32 160A New 32Bit ESC:

> Get E-Manual: MTSF160A-WP32 Manual and Instruction

> Get E-Manual: Remote Manual and Instruction

> Check Video Using Instruction

Specification:

Model No.: MTSF160A-WP32 with Progcard32
Waterproof Rank: IP68Cont Current: 160APeak Current: 180AInput Voltage: 6-12S Lipo (25V-50V) in this kitWith 5V/0.5A BEC
32BIT MicropprocessorApplication: foil assist board, Efoil, electric surfboard, electric hydrofoil, underwater thruster, ROV, electric outboard, elcetric sup board, underwater robots, trolling mtor system, bow thruster, underwater jetpack, etc.,

2. MTI65162 Inrunner Waterproof Motor

Model No.	MTI65162-120-SF
KV	120
Shaft	Screw Shaft
Input Voltage	6-12S Lipo (25V-50V) in this kit
Waterproof Rank	IP68
Max Current	300A
Max Output Power	9KW
Pole Number	6 poles
Max Torque	10N.m
Connector	8.0mm male gold-plated bullet connector
Hall Sensor	Without
Propeller	Optional for 120KV
Customize	KV, logo, shaft, cable, connector, cover, case, etc., contact [email protected]

3. Remote: MTSKR1905WF IP67 Waterproof Remote for Esurf, with PWM & UART Receiver

Model No	MTSKR1905WF
Waterproof Rank	IP67 double waterproof
Thr Mode	ESURF (SF) and ESK8 (SK)
3 Speed Modes	With, adjust throttle % from 20-100%
Power Modes	2 levels, Eco (Level 1) < Pro (Level 2)
Throttle Lock	Yes, 10-30S optional
Signal Format	Support Standard PWM (PPM) and UART, output range from 10%-20%, which correspond to ESC/VESCTOOL Compatible controller throttle output range from 0%-100%.
PWM Signal Output Range	1ms-2ms for throttle no brake in Esurf mode; 1.5ms-2ms for throttle, 1.5ms-1ms for brake in Esk8 mode.
Double Source Power Supply	Accept 5V power by ESC built-in BEC or extra 5V power
Output Signal	Max 3.3V
Display Parameters	Current, voltage, temperature only when work with VESC or Maytech MTSF300A-WP32 ESC; Signal strength, remote and battery power bars, battery voltage, RPM with VESC and other ESCs
Control Pump	Yes (Relay Switch)
Control Light	Yes (Transistor Switch)
Safety Button	Support
Cruise Control	With in Esurf Mode
Brake	With in Esk8 Mode
Accessories	Wirelss charging pad / Receiver / USB cable / Wristband / 3pcs Dupond cable
Compatible Controllers	VESC/ Focbox/ Other PWM ESCs that has same signal output range with the remote.
Application	foil assist system, electric propulsion, underwater thruster, electric outboard, Esurf, Efoil, electric hydrofoil, electric surfboard, electric skateboard/ elongboard/ mountainboard, electric paraglider, etc.,

4. MTS2009AS Antispark Switch

Model No.	MTS2009AS
Max Current	300A
Input Voltage	6-20S Lipo (25-85V), recommend better work under 75V
Swith Diameter	12mm
Switch Type	NMOS to realize switching on/off Power positive
Waterproof	No, please keep the switch in dry space
Connector	With 4pcs Cold-pressed Terminal Connector
Function	Protect your controller and power supply system when brake or startup
Application	Electric surfboard, efoil, foilboard, jetski, jetboard, jetsurf, motorized hydrofoil, motorcycle, fighting robots, lawnmower robot, Electric mountainboard, ATV, motor bike, Airplane, VTOL, UAV, Dronesetc.,
Features:	Switch comes with LED light indicator; Shutdown current less than 1uA; Suitable for load: three phase motor speed controller; Boot soft start; Automatic short circuit protection when boot; Automatic short circuit protection when work.

Advice after usage:

1. To expand the products life, please better wipe off the waters on the products and keep them for all dry after everytime use.

2. For this kit of the ESC, because the motor is sensorless, suggest to use the default value in the ESC, we have tested the kit before shipment with the default value, do not suggest to modify the values.

If you have other requirement on motor KV, ESC or other questions, please contact us at[email protected] .