GEPRC MARK5 O4 Pro FPV Drone (DC Frame, Emerald Green)

Description

GEPRC MARK5 O4 Pro DC FPV Droneemerald green

TheGEPRC MARK5 O4 Pro FPV Drone (DC Version, Emerald Green) is a premium 5-inch freestyle quad specifically designed for compatibility with the DJI O4 Air Unit Pro. Engineered for ultra-smooth footage, low-latency HD video transmission, and rock-solid flight performance, this drone is ideal for cinematic pilots and freestyle enthusiasts alike.

Featuring a newly designed aluminum camera mount with molded silicone damping, the GEPRC MARK5 O4 Pro FPV Drone minimizes vibration and resonance for ultra-clear video capture. Its powerful TAKER F722 BT 32-bit flight controller paired with a 50A BLHeli_32 ESC delivers smooth and responsive control, while SPEEDX2 2107.5 1960KV motors provide punchy, reliable power on 6S LiPo.

The DC frames wider wheelbase improves stability and reduces prop-in-view for cleaner footage. Quick-swap arms and a neatly integrated capacitor/buzzer compartment make maintenance simple. With Bluetooth tuning support and up to 8 minutes of cruising flight time, this drone is ready for advanced cinematic flying or ripping freestyle lines right out of the box.

Key Features:

• DJI O4 Air Unit Pro w/ 1080p 100fps video & 4K 120fps recording

• DC frame layout for stability and prop-free video

• TAKER F722 BT 32-bit FC with built-in Bluetooth tuning

• SPEEDX2 2107.5 1960KV motors + 50A BLHeli_32 ESC

• Molded silicone vibration damping + aluminum camera mount

• Quick-release arms with 2-screw design for easy swaps

• Compatible with ELRS 2.4G, TBS NanoRX, and optional GPS

• Emerald green 3D printed accessories for a sleek look

Specifications

Wide X Version

• Model: MARK5 O4 Pro Wide X FPV

• Wheelbase: 225mm

• VTX: DJI O4 Air Unit Pro VTX module

• Camera:DJI O4 Air Unit Pro camera module

• Antenna: DJI O4 Air Unit Pro Antenna

• Motor:SPEEDX2 2107.5 1960KV

• Prop: Gemfan 5136

• FC: GEP-F722-BT-HD V3

• MCU: STM32F722

• IMU: ICM42688-P(SPI)

• OSD: BetaFlight OSD w / AT7456E chip

• ESC: GEP-BL32 50A 96K 4IN1 ESC

• Power Connector: XT60H-M

• Receiver: PNP / ELRS 2.4G / TBS NanoRX

• Recommended Battery: LiPo 6S 1050mAh-1550mAh

• Printouts Color: emerald green

• Weight: 414g 5g

• Flight Time: 6-8 minutesBased on slow cruising tests, the actual may vary due to product differences, firmware version, flying style, and environment. For reference only

DC Version

• Model: MARK5 O4 Pro DC FPV

• Wheelbase: 230mm

• VTX: DJI O4 Air Unit Pro VTX module

• Camera: DJI O4 Air Unit Pro camera module

• Antenna: DJI O4 Air Unit Pro Antenna

• Motor: SPEEDX2 2107.5 1960KV

• Prop: Gemfan 5136

• FC: GEP-F722-BT-HD V3

• MCU: STM32F722

• IMU: ICM42688-P(SPI)

• OSD: BetaFlight OSD w / AT7456E chip

• ESC: GEP-BL32 50A 96K 4IN1 ESC

• Power Connector: XT60EW-M

• Optional GPSGEP-M10 GPS

• Receiver: PNP / ELRS 2.4G / TBS NanoRX

• Recommended battery: LiPo 6S 1050mAh-1550mAh

• Printouts Color: emerald green

• Weight: 433.4g 5g

• Flight Time: 6-8 minutesBased on slow cruising tests, the actual may vary due to product differences, firmware version, flying style, and environment. For reference only

Includes

1 x GEPRC MARK5 O4 Pro FPV

1 x Gemfan 51362CW 2CCW

1 x 15*250mm strap

2 x 20*250mm straps

2 x Battery anti-slip pads

1 x 3D printouts pack

1 x Spare screw pack

1 x L-shaped screwdriver 1.5mm

1 x L-shaped screwdriver 2mm

1 x L-shaped screwdriver 3mm

1 x M8 wrench

Spare Screws Included:

1 x M5 Flange Nylon Knurled Nut

2 x M2 Stainless Steel Press-fit Nuts

1 x M5*25 Stainless Steel Button Head Hex Screw

4 x M3*10 Button Head Hex Screws

4 x M3*8 Button Head Hex Screws

2 x M3*8 Countersunk Hex Screws

2 x M3*5 Countersunk Hex Screws