GEPRC TAKER F405 BLS 80A V2 Flight Controller Stack STM32F405 FC + 80A 36S 4in1 ESC for High-Power FPV Builds

Description

Overview

The GEPRC TAKER F405 BLS 80A V2 Stack is a high-performance flight controller stack built for power-hungry FPV drones. It combines a GEP-F405-HD V3 flight controller featuring a STM32F405 chip, ICM42688-P gyro, and 16MB black box, with the TAKER H80_BLS 80A 4IN1 ESC supporting 36S LiPo, 80A continuous current, and dual MOSFETs for reliable current output. Designed for serious freestyle, long-range, and cinematic builds.

Features

Flight Controller

• Uses mainstream STM32F405 processor with strong computing capability

• Equipped with high-precision ICM42688-P gyroscope (SPI)

• 16MB black box for flight log storage

• Integrated LC power filter for clean signal and stable performance

• Type-C USB port for easy connectivity

• Direct plug support for DJI Air Unit (no soldering needed)

• Built-in barometer, 6 UART ports, and BetaFlight OSD with AT7456E

• Dual independent BEC outputs: 5V@3A and [email protected]

• Silicone shock absorbers for vibration reduction and stable gyro performance

ESC

• TAKER H80_BLS 4IN1 ESC with dual MOS design for high-current efficiency

• Supports 36S LiPo input

• 80A continuous current, 85A burst current (5 seconds)

• Compatible with DShot150/300/600 protocols

• Integrated current sensor (Ammeter)

• Optimized for smooth throttle response and heat dissipation

Specifications

GEP-F405-HD V3 Flight Controller

• MCU: STM32F405

• IMU: ICM42688-P (SPI)

• Black Box: 16MB

• USB: Type-C

• OSD: BetaFlight OSD w/ AT7456E

• Barometer: Supported

• BEC Output: 5V@3A + [email protected]

• Firmware Target: GEPRCF405

• Motor Outputs: M1M6

• UART Ports: 6

• Input Voltage: 36S LiPo

• Mounting Dimensions: 30.530.5mm (4mm / 3mm with grommets)

• Size: 37.15 37.15mm

• Weight: 7.3g

TAKER H80_BLS 80A 4IN1 ESC

• Input Voltage: 36S LiPo

• Continuous Current: 80A

• Burst Current: 85A (5 sec)

• ESC Protocols: DShot150 / DShot300 / DShot600

• Current Sensor: Supported

• Firmware Target: B_X_30

• Mounting Dimensions: 30.5 30.5mm (4mm / 3mm with grommets)

• Size: 56.3 61.1mm

• Weight: 28.1g

Application Scenarios

Perfect for 5-inch to 7-inch FPV drones, this stack is ideal for freestyle, cinematic flying, and long-range cruising. Its robust ESC with 80A continuous current ensures it can handle high-thrust motors, heavy payloads, or demanding power loops with ease.

Details

Taker F405 BLV stack features 4/3 layout, with 62.9mm lens and Quoquor design.

Specifications GEP-F4O5-HD V3 Flight Controller features an MCU STM32F405, ICM42688-P IMU, and a black box with 16M onboard memory. It has dual BECs that provide 5V at 3A and 12V at 2.5A. The firmware target is CEPRCF405, and the size is 37.15×37.15mm. The mounting holes are 30.5×30.5mm in diameter.

The product features the mainstream STM32F405 chip, equipped with a latest 42688-P gyroscope. It also has 16M black box storage and an integrated LC filter. The device includes a Type-C USB interface and directly connects to the DJI Air Unit. Additionally, it comes with the TAKER H80_BLS 8OA 4INI ESC, which features dual MOS for high current and smooth flight.

High-performance processor with 2.82 GHz speed and 4 cores. Equipped with 18 PUOQUR and 283 MHz clock rate. Features 2 x 16GB RAM for efficient multitasking.

rcdrone.top. All rights reserved.