GEPRC TAKER F722 SE Flight Controller STM32F722, 6 UARTs, 26S, MPU6000, Dual BEC, 25.5×25.5mm for FPV Drones
Original price was: $66.00.$33.00Current price is: $33.00.
Description
Overview
The GEPRC TAKER F722 SE is a high-performance flight controller designed for serious FPV drone pilots, offering exceptional reliability and expandability for freestyle, cinematic, and long-range builds. Powered by the STM32F722RET6 MCU and MPU6000 gyro, it delivers stable flight control and precise sensor feedback. With 6 UARTs, 32MB Blackbox, and dual BEC outputs ([email protected] + 10V@2A), it supports advanced peripherals like GPS, HD VTX systems, and digital receivers. The compact 25.5×25.5mm mounting pattern and integrated LC filter ensure clean signals and frame compatibility.
Specifications
| Parameter | Details |
|---|---|
| Model | GEPRC TAKER F722 SE FC |
| MCU | STM32F722RET6 |
| IMU (Gyro) | MPU6000 |
| Blackbox | 32MB Flash |
| USB Port | Type-C |
| OSD | Betaflight OSD with AT7456E chip |
| BEC Output | 5V @ 2.5A, 10V @ 2A (dual output) |
| Firmware Target | TAKERF722SE |
| UART Ports | 6 UARTs (UART6 dedicated for ESC) |
| Input Voltage | 26S LiPo (7.4V25.2V) |
| Power Filter | Integrated LC Filter |
| Dimensions | 31.7 31.5 mm |
| Mounting Pattern | 25.5 25.5 mm (4mm holes, adaptable to 3/2mm) |
| Weight | 6.0g |
Key Features
-
High-speed STM32F722 MCU enables faster loop times and smooth response
-
MPU6000 gyro offers vibration resistance and stable sensor data
-
6 UART ports for full expandability: GPS, Crossfire/ELRS, HD VTX, analog VTX, telemetry, and more
-
Dual BEC outputs (5V & 10V) for powering peripherals like cameras, VTXs, and receivers
-
32MB Blackbox for flight tuning and performance analysis
-
Integrated LC filter reduces power noise and improves system stability
-
Type-C USB port for convenient firmware flashing and Betaflight setup
-
Lightweight and compact design fits most modern 35 inch frames
Recommended Applications & Pairings
-
Ideal for:
-
5″ freestyle drones (e.g., GEPRC Mark5, iFlight Nazgul Evoque)
-
4″ long-range quads
-
HD builds using DJI O3, DJI O4, Walksnail Avatar, or HDZero VTX systems
-
-
Recommended ESC pairing:
-
GEPRC TAKER E55_96K 4-in-1 ESC (55A) for 5-inch
-
BLHeli_32 35A60A ESCs for 36S compatibility
-
-
Receiver support:
-
ELRS 2.4G (UART)
-
Crossfire Nano RX
-
FrSky R-XSR (SBUS/UART)
-
-
VTX compatibility:
-
Analog (using AT7456E OSD chip)
-
Digital HD VTX via UART (DJI, Walksnail, HDZero)
-
Whats Included
-
1 GEPRC TAKER F722 SE Flight Controller
-
Mounting hardware and silicone vibration dampers
rcdrone.top. All rights reserved.




Reviews
There are no reviews yet.