GEPRC TAKER S80 8S BLS 80A ESC Electronic Speed Controller, 3-8S LiPo, DShot150/300/600

Description

Overview

The GEPRC TAKER S80 is a single ESC (electronic speed controller) designed for 3-8S LiPo input and high-current builds, supporting DShot 150/300/600 control protocols. It is compatible with BLHeli_S and BlueJay firmware options.

Key Features

• Self-contained MOS heat sink for efficient cooling under high current loads.
• Wide battery voltage compatibility (3-8S LiPo) with high-quality MOS for stable operation under high power.
• Compatible with BLHeli_S and BlueJay firmware.
• Custom-molded heat-dissipating case with hollow design (case version) to enhance cooling efficiency.

Specifications

Parameter	With Case Version	ESC Only
Input Voltage	3-8S Lipo	3-8S Lipo
Ammeter	Not Supported	Not Supported
Continuous Current	80A	80A
Burst Current	85A (5 seconds)	85A (5 seconds)
Protocols Supported	Dshot 150/300/600	Dshot 150/300/600
ESC Dimension	32.5 x 55 mm	31.55 x 54.6 mm
Mounting Holes	29.6 x 48.5 mm	29.6 x 48.55 mm
Case Material	PC	–
Case Dimension	36 x 76 mm	–
Color	Black	–
Weight	68.8 g	13.7 g

Important Notes

With Case Version: the product ships as loose components. The casing requires self-assembly, and both power and signal cables need manual soldering.

For customer service, contact [email protected] or visit https://rcdrone.top/.

Whats Included

With Case Version

• 1 x TAKER S80 8S BLS 80A ESC
• 1 x 50V 2200uF Capacitor
• 1 x 10AWG (3.4mm2) Black Silicone Wire (240mm)
• 1 x 10AWG (3.4mm2) Red Silicone Wire (240mm)
• 1 x 2.54mm Dupont Line – 2P Single-end Socket Connector Cable (110mm)
• 1 x Single ESC Top Case (Black) Molded Part
• 1 x Single ESC Bottom Case (Black) Molded Part
• 8 x Grade 12.9 Round Head Hex Socket Screws, Black Nickel Plated – M2*7 (Pre-applied Glue)

ESC Only

• 1 x TAKER S80 8S BLS 80A ESC
• 1 x 50V 2200uF Capacitor
• 1 x Black Power Cable (10AWG 240mm)
• 1 x Red Power Cable (10AWG 240mm)
• 1 x 2.54mm Dupont Line – 2P Single-end Socket Connector Cable (150mm)

Details

GEPRC TAKER S80_8S BLS 80A ESC with case. Ships as loose components; self-assembly required. Power and signal cables need manual soldering. Black casing, red/black wires, compact design for drone applications.

GEPRC TAKER S80 BLS 80A ESC supports Dshot protocols, handles 80A continuous and 85A burst current, fits 3-8S input, measures 36x76mm, weighs 68.8g, black PC case, M2 mounting holes.

The product includes a GEPRC TAKER S80 8S BLS 80A ESC main board, two black plastic casing pieces, one capacitor, eight blue-tipped screws, and a wiring harness. Wires are labeled 200C 10AWG repeatedly. All components are neatly arranged against a white background for clear identification. No additional branding or watermark text is present.

Includes GEPRC TAKER S80 8S BLS 80A ESC, capacitor, and 200C 10AWG wiring. Components for electronic speed controller assembly with temperature and gauge specs clearly marked on cables.