Sale!
iFlight GM5208-12 Brushless Gimbal Motor with AS5048A Encoder, 12N14P, Hollow Shaft, 3-5S

iFlight GM5208-12 Brushless Gimbal Motor with AS5048A Encoder, 12N14P, Hollow Shaft, 3-5S

Original price was: $79.84.Current price is: $39.92.

SKU: BVHB1865359713 Category:

Description

Overview

iFlight GM5208-12 is a brushless gimbal motor with encoder, designed for direct-drive camera stabilization setups. The GM52 series is intended for DSLR-sized camera payloads such as CANON 5D MARKII / MARKIII and RED Epic & DSLR sized gear, with a stated load torque of 18002500 gcm.

Brushless direct-drive gimbal stabilization using BLDC motors follows a similar operating principle to hobby servo-based gimbals, while using a direct-drive motor approach.

Key Features

  • GM5208-12 brushless gimbal motor with AS5048A encoder (aluminum case)
  • 12N/14P motor configuration
  • Hollow shaft design (specified OD/ID)
  • Clockwise steering (axle extension)
  • 35S working voltage range

Specifications

Model GM5208-12
Motor outer diameter 63 0.05 mm
Configuration 12N/14P
Motor height 30.7 0.2 mm (included with encoder housing)
Hollow shaft OD 15 -0.008/-0.012 mm
Hollow shaft ID 12 +0.05/0 mm
Wire length 610 3 mm
Cable AWG #24
Motor weight 209 0.5 g
Wire plug 2.5 mm Dupont connector
No-load current 0.09 0.1 A
No-load voltage 20 V
No-load RPM 456504 RPM
Load current 1 A
Load voltage 20 V
Load torque 18002500 gcm
Motor internal resistance 15.2 ohm 5% (resistance varies with temperature)
High voltage test DC 500 V 10 mA @ 1 sec
Rotor housing runout 0.1 mm
Steering (axle extension) Clockwise
High temperature test Keep at 60C for 100 hours; motor can work normally after 24 hours at room temperature
Low temperature test Keep at -20C for 100 hours; motor can work normally after 24 hours at room temperature
Maximum power 40 W
Working voltage 35S
Working temperature / humidity -20 to 60C; 10 to 90% RH

Whats Included

  • 1 x iPower GM5208-12 gimbal motor
  • 1 x AS5048A encoder with aluminum case

Applications

  • Direct-drive brushless camera gimbals
  • DSLR camera stabilization (e.g., CANON 5D MARKII / MARKIII)
  • Large multi-rotor camera platforms using gimbal stabilization

For compatibility questions (encoder integration, wiring/connector matching, and system setup), contact support at https://rcdrone.top/ or email [email protected].

Reviews

There are no reviews yet.

Be the first to review “iFlight GM5208-12 Brushless Gimbal Motor with AS5048A Encoder, 12N14P, Hollow Shaft, 3-5S”

Related products