Lumenier QAV-S 2 JohnnyFPV SE 5″ 6S DIY Kit

Description

The Lumenier QAV-S 2 JohnnyFPV SE 5″ 6S DIY Kit is a drone frame kit designed for cinematic FPV Freestyle flying! This frame has an innovative X-Lock arm retention system. The arms can fold for convenient transportation with just two screws. The frame’s aluminum FPV camera protection ensures it will take a bashing before the lens does. With 6mm thick arms, the QAV-S 2 5″ frame is ready for flight.

Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern. It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users. The mounting system adds versatility, allowing direct mounting of both the O3/O4 air unit & Walksnail Avatar HD Pro, supported by a 5mm full aluminum mounting kit for optimal wire routing. The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas, GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame where innovation meets performance!

Now Includes the O4 Pro Upgrade Kit!

Note: Receiver is not included. A receiver that is compatible with your controller is required. This is a Full DIY Build Kit with assembly required.

*The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.

Make sure to check out our otherPre-Built quads and our Lumenier product selection!

Features

• DIY kit contains most components to build your own drone
  
• Made in Collaboration with expert FPV pilot JohnnyFPV
  
• Frame made of High-Quality Lumenier components
  
• Adjustable Aluminum XT60 and Accessory Mount
  
• Backward-compatible mounting patterns
  
• Aluminum FPV Camera Protection
  
• Balanced Durability and Weight
  
• Injection-Molded GoPro Mount
  
• X-Lock Arm Retention

VIDEO: NEW Lumenier QAV-S 2 JohnnyFPV Frame – BELIZE FPV

Specifications

• Stack: Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
  
• Propeller: HQProp Juicy J40 5.1x4x3 Propeller (Set of 4) – Grey
  
• Motor: Lumenier 2307 JohnnyFPV V3 Pro Cinematic Motor
  
• Frame: Lumenier QAV-S 2 JohnnyFPV SE 5 Frame Kit

Links

• Lumenier QAV-S 2 JohnnyFPVManual

Includes

• No FPV System:
  • 1x Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
    
  • 1x Lumenier QAV-S 2 JohnnyFPV SE 5 Frame Kit
    
  • 2x HQProp Juicy J40 5.1x4x3 Propeller (Set of 4)
    
  • 1x Immortal T Antenna – Regular Length
    
  • 4x Lumenier Johnny V3 2307 1750kv
    
  • 1x Lumenier Zipper Case
    
  • 1x O4 Pro Upgrade Kit
  • 1x Hardware Kit
• Walksnail Avatar:
  • 1x Axisflying Argus Pro F7 FC + Axisflying Argus Pro 55A 3-6S BLHeli_32 ESC + wire cover (No Heat Sink)
  • 1x Lumenier QAV-S 2 JohnnyFPV SE 5 Frame Kit
  • 2x HQProp Juicy J40 5.1x4x3 Propeller (Set of 4)
  • 4x Lumenier JohnnyFPV Pro V3 2307 1750kv
  • 1x Immortal T Antenna – Regular Length
  • 1x Walksnail Avatar HD Pro Kit
  • 1x Lumenier Zipper Case
  • 1x O4 Pro Upgrade Kit
  • 1x Hardware Kit