MAD AM50 34KV Power System Kits (Product Type) with AMPX FOC 300A 28S ESC + FLUXER PRO Prop Options

Description

Overview

The MAD AM50 34KV Power System Kits (Product Type) are heavy-lift power system kit options built around the AM50 34KV motor, MAD AMPX FOC 300A 28S ESC, and FLUXER PRO propellers. Two kit versions are available depending on whether propeller lock (fixed stop position) is required.

Key Features

• Kit options:
  • Kit A: Without lock propeller function. Includes 1x ESC (standard firmware) and 1x CW or CCW propeller.
  • Kit B: Motor features a magnetic encoder to detect and lock the propeller at a specified stop position (requires compatible ESC firmware). Includes 1x ESC (with required firmware) and 1x CW or CCW propeller.
• ESC system: Next-gen smart ESC system with easy tuning and OTA updates; dual CAN/PWM throttle support; DSP chip (automotive-grade), FOC adaptive algorithm, 0.28 s dynamic response; 3rd-gen SiC MOSFETs.
• Motor construction notes: 220C high-temp resistant copper windings; UH Arc magnets; premium Japan bearings; aviation-grade screws with elastic washers.
• Coils & monitoring: Vacuum-sealed coils; real-time temperature monitoring.

Specifications

Combo model	AM50-Kit
KV	34 KV
Max thrust	105.9 kg
Rated thrust	50 kg
Recommended takeoff weight	50 kg
Efficiency	6.8 gf/W
Lithium compatible	24S (Lipo)
Operating temperature	-20~50C
IP degree	IP45
Power cable / length	7AWG / 280 mm
Signal wire	8pin/1180 mm

Motor (AM50)

Model	AM50
Slot & pole	36N42P
Motor size	D: 167 x 94.3 mm
Cable length	200 mm (Extended Enameled Wires)
Weight	4.4 kg

ESC

Model	MAD AMPX FOC 300A 28S
Size	178*74.4*50.3 mm
Weight	1050 g
Continuous output current	200A
Peak output current	300A (10S)
PWM input pulse width	1100~1900s
Degree of protection	IP45
Communication interface	CAN*2 (CAN2.0B, 1M bps)

Propeller options

Model	FLUXER PRO 61X17 PROP
Material of props	High Quality Carbon Fiber+Resi
Mounting dimensions	D25-D50 (M6*6) Centre Hole D25
Weight	83030 g
Propeller dimension (overall length)	1549.4
Thickness	23.30.2 mm
Pitch marking	6*60

Model	FLUXER PRO 65X18 PROP
Material of props	High Quality Carbon Fiber+Resi
Mounting dimensions	D25-D50 (M6*6) Centre Hole D25
Weight	95050 g
Propeller dimension (overall length)	1651
Thickness	25.30.2
Pitch marking	6*60

Test Data

Test conditions (from chart/table): Input voltage 98 V, temperature 25C, sea level. Rotational speed adjusted by throttle. Curves indicate I (Current), P (Input Power), (Electrical Efficiency), T (Thrust), N (Rotational Speed).

• Curve chart label: AeroMax 50 34KV + FLUXER 65×18″ PROP + AMPX FOC 300A 28S @ 98V

Kit test data tables: AeroMax 50 34KV + FLUXER PRO 61X17 PROP / FLUXER PRO 65X18 PROP + AMPX FOC 300A 28S @ 98V. (Throttle, Voltage, Current, Input Power, Output Power, Torque, RPM, Thrust, Efficiency, Efficiency gf/W)

Dimensions & Wiring

• Motor: Encoder and thermal output 450 mm 10 mm; motor three-phase line output 200 mm.
• ESC wiring diagram labels: Output A / Output B / Output C; blade positioning/temperature monitoring; BLACK V-; Red V+; GND; PWM input; CANH; CANL; 5V output; CANH2; CANL2 (wire colors labeled: Black/White/Yellow/Red/Blue).
• ESC size drawing notes: Power cable (-) 7AWG black wire length 28010 mm; power cable (+) 7AWG red wire length 28010 mm; signal wire 8-core shielded wire + 3 pins, wire length 118010 mm; motor wire 3x7AWG black wire length 30010 mm; temperature sensor wire 4-core shielded wire (22AWG) + black waterproof male connector, wire length 17010 mm.

Whats Included

• Kit A: 1x ESC (standard firmware), 1x CW or CCW propeller
• Kit B: 1x ESC (with required firmware), 1x CW or CCW propeller

For product selection help (Kit A vs Kit B) and compatibility questions, contact support at https://rcdrone.top/ or email [email protected].

Applications

• Heavy-lift multirotor platforms
• Logistics and delivery drones
• Mapping and aerial survey
• Emergency response operations

Details

The AeroMax 50 kit pairs a large propeller with a brushless motor for heavy-lift drone power setups.

The AM50 34KV setup lists 50 kg rated thrust, 105.9 kg peak thrust, and a 4.4 kg motor weight, with vacuum-sealed coils and real-time temperature monitoring.

The AeroMax 50 power system kit pairs a 34KV motor with an AMPX FOC 300A 28S ESC and includes basic parameter and curve data for setup.

Test data lists throttle, voltage, current, RPM, thrust, torque, and efficiency for the AeroMax 50 34KV system with the AMPX FOC 300A 28S ESC and FLUXER PRO 61×17 prop at 98V.

Motor and ESC dimension details help plan mounting, cable routing, and connector clearance in your power system build.

The kit includes an AMPX FOC ESC wiring sequence reference and Fluxer Pro prop size options of 61×17 or 65×18 for planning your power setup.

The AMPX FOC ESC platform supports easy tuning with OTA updates, plus dual CAN/PWM throttle input for flexible integration.

High-performance carbon fiber propellers with a bio-inspired airfoil and 3D twist design are positioned for strength, reduced flutter, and lower noise.

Details

The AeroMax 50 heavy-lift power system kit pairs a large propeller with a brushless motor for a clean, integrated drive setup.

The MAD AM50 34KV setup lists 50 kg rated thrust, 105.9 kg peak thrust, a 4.4 kg design, and features like vacuum-sealed coils and real-time temperature monitoring.

AeroMax 50 kit parameters summarize the AM50 34KV motor, AMPX FOC 300A 28S ESC, and available FLUXER prop options.

98V bench test data lists throttle points with voltage, current, RPM, thrust, torque, and efficiency for the AeroMax 50 34KV kit using an AMPX FOC 300A 28S ESC and FLUXER PRO 61×17 prop.

Motor and ESC dimension drawings help confirm mounting hole spacing and overall fit before installing the AM50 power system kit.

The kit includes an ESC line sequence wiring reference and dimensioned FLUXER PRO prop options in 61×17 and 65×18 sizes.

The AMPX FOC ESC system supports OTA tuning, dual CAN/PWM throttle input, and uses SiC MOSFETs for the power stage.

These high-performance carbon fiber propellers use a bio-inspired airfoil and 3D twist design, with stated gains in strength, anti-flutter performance, and noise reduction.

MAD AM50 power system components are validated with endurance runs, -40C to 85C thermal cycling, 48-hour salt spray corrosion testing, and IP45 waterproof testing.