Sale!

MAD BSC2306 V1.0 FPV drone motor 1750KV/1950KV 6S, 12N14P, M5 nut, 4mm shaft, 150mm cable

Original price was: $19.85.Current price is: $11.91.

SKU: BVHB1865366075 Category:

Description

Overview

MAD BSC 2306 is an FPV drone motor (MAD BSC2306 V1.0) offered in 6S KV options (1750KV and 1950KV). Recommended accessories (as provided):

  • For 5 inch: Motors 2205/2206/2207/2305/2306; ESC 30A-50A; Propeller 5 inch; Battery 4S 1500mAh, 6S 11 50mAh
  • For 6 inch: Motors 2207/2207.5/2305/2306/2407; ESC 35A-60A; Propeller 6 inch; Battery 4S 1500mAh, 6S 1300mAh
  • For 7 inch: Motors 2305/2306/2407/2408/2507; ESC 40A-60A; Propeller 7 inch; Battery 4S 1800mAh, 6S 2200mAh

Key Features

  • Shock absorbing design (stated to extend bearing life and reduce motor vibration)
  • High slot fill rate (stated to save power and deliver rapid response)
  • N52H arc-shaped magnet
  • Linearity-focused low-throttle output description for 5″ long-range FPV drones (stated)
  • KV options shown: BSC2306 KV1750 / KV1950 (also referenced alongside BSC2207.5 KV1750 / KV1950)

For build compatibility or setup questions (prop/ESC selection, 6S KV choice, mounting), contact [email protected] or visit https://rcdrone.top/.

Specifications

Motor Data

Motor Model MAD BSC2306 V1.0 Number of pole pairs 12N14P
Motor Size D:28.2 31.9 mm Rotor Balance 5 mg
Propeller Mounting Holes M5 Nut Motor Mounting Holes D:16 M34
Shaft Diameter IN: 4 mm Cable Length 150 mm 20# Awg(Black) silicone

Drawing and Mount Holes (dimensions shown)

  • Overall length: 31.9
  • Threaded shaft length: 13
  • Prop shaft thread: M5
  • Diameter: 28.2
  • Mounting pattern: 16 – M34

1750KV (6S) MAD BSC2306

Test note (stated): Data measured with input voltage of 24 V, at 25C and sea level; rotational speed adjusted by throttle. Legend: I = Current, P = Input Power, = Electrical Efficiency, T = Thrust, N = Rotational Speed.

RPM/V 1750 KV Internal resistance 72m
No Load Current 1.37A / 10V Maximum thrust 1.61 kg
Maximum Current 35.7 A Maximum Power 885.4 W
Motor Weight 34.6 g Product Boxed Weight 48.3 g

1750KV (6S) Performance Table MAD BSC2306 1750KV 51433

Throttle (%) Voltage (V) Current (A) Input Power (W) RPM Thrust (gf) Efficiency (gf/W) MAX
50 25.2 8.34 210.2 20018 635 3.0 /
55 25.1 10.35 259.8 21064 704 2.7
60 25.1 12.44 312.2 22110 774 2.5
65 25.1 14.75 370.2 23363 875 2.4
70 25.1 17.23 432.5 24614 977 2.3
75 25 19.95 498.8 25866 1079 2.2
80 25 22.8 570.0 27121 1181 2.1
85 25 25.65 641.3 28289 1287 2.0
90 25 28.67 716.8 29458 1335 1.9
95 24.9 31.3 779.4 30627 1502 1.9
100 24.9 34.17 850.8 31851 1610 1.8

1750KV (6S) Performance Table MAD BSC2306 1750KV 51466

Throttle (%) Voltage (V) Current (A) Input Power (W) RPM Thrust (gf) Efficiency (gf/W) MAX
50 25.1 8.27 207.6 19727 622 3.0 /
55 25.1 10.02 251.5 20791 691 2.7
60 25.1 12.37 310.5 21859 761 2.4
65 25.1 14.8 371.5 23128 869 2.3
70 25.1 17.43 437.5 24397 978 2.2
75 25 20.15 503.8 25663 1085 2.2
80 25 22.84 571.0 26934 1197 2.1
85 25 25.77 644.3 28016 1297 2.0
90 24.9 29.03 722.8 29099 1399 1.9
95 24.8 32.4 806.8 30181 1500 1.9
100 24.8 35.7 885.4 31265 1593 1.8

1950KV (6S) MAD BSC2306

Test note (stated): Data measured with input voltage of 24 V, at 25C and sea level; rotational speed adjusted by throttle. Maximum thrust may depend on battery level, propeller type, air pressure and other conditions.

RPM/V 1950 KV Internal resistance 63m
No Load Current 1.4A / 10V Maximum thrust 1.64 kg
Maximum Current 39.1 A Maximum Power 872.5 W
Motor Weight 34.6 g Product Boxed Weight 48.3 g

1950KV (6S) Performance Table MAD BSC2306 1950KV 51466

Throttle (%) Voltage (V) Current (A) Input Power (W) RPM Thrust (gf) Efficiency (gf/W) MAX
50 23.8 9.02 214.7 18275 619 2.9 /
55 23.72 11.11 263.5 19646 725 2.7
60 23.6 13.52 319.1 21147 838 2.6
65 23.47 16.26 381.6 22428 959 2.5
70 23.36 19.29 450.6 23681 1076 2.4
75 23.25 22.15 515.0 24812 1174 2.3
80 23.12 25.22 583.1 25881 1264 2.2
85 23.01 28.05 645.4 26669 1354 2.1
90 22.82 31.6 721.1 27631 1457 2.0
95 22.61 35.16 795.0 28338 1482 1.9
100 22.42 37.6 843.0 29010 1591 1.9

1950KV (6S) Performance Table MAD BSC2306 1950KV 51466 (set 2)

Throttle (%) Voltage (V) Current (A) Input Power (W) RPM Thrust (gf) Efficiency (gf/W) MAX
50 23.75 10.18 241.8 18100 631 2.6 /
55 23.66 12.36 292.4 19336 734 2.5
60 23.53 14.73 346.6 20748 843 2.4
65 23.41 17.61 412.3 22200 965 2.3
70 23.29 20.67 481.4 23414 1086 2.3
75 23.17 23.8 551.4 24463 1198 2.2
80 23.05 26.88 619.6 25441 1284 2.1
85 22.92 29.47 675.5 26152 1374 2.0
90 22.74 32.78 745.4 26961 1478 2.0
95 22.52 36.51 822.2 27728 1557 1.9
100 22.32 39.09 872.5 28107 1643 1.9

Whats Included

  • BSC2306 motor
  • M5 NUT 1
  • M38mm cuphead screw 4
  • GASKET 1
  • O-RING 1
  • M35mm pan head screws 1
  • MAD sticker 6

Applications

  • FPV drone builds using MAD BSC2306 V1.0 motors
  • 5 inch, 6 inch, and 7 inch propeller setups (with the listed ESC and battery recommendations)

Details

MAD BSC2306 V1.0 motor dimensions list a 28.2 mm outer diameter, 31.9 mm overall length, and a 16 mm M3x4 mounting pattern.

The MAD BSC2306 V1.0 motor comes with a nut, mounting screws, gasket, O-ring, and MAD sticker set for installation.

The MAD BSC2306 FPV drone motor features a compact black housing with MAD Components branding and visible copper windings for clean, straightforward installs.

The MAD BSC2306 motor features a silver bell with a threaded shaft and clearly labeled KV1950 marking for easy identification.

The MAD BSC2306 V1.0 FPV drone motor is positioned for 5-inch long-range builds and emphasizes linear low-throttle power delivery.

The MAD BSC2306 V1.0 motor features a shock-absorbing design intended to reduce vibration and help extend bearing life.

The MAD BSC2306 V1.0 motor features a high slot fill stator with tightly wound copper coils around the center bearing.

The MAD BSC2306 V1.0 motor uses N52H arc-shaped magnets inside the bell for a clean, robust rotor assembly.

MAD Motor offers a range of FPV brushless motor options across BSC, Freestyle, Cinematic, and X-Class series for different build styles.

The MAD BSC2306 V1.0 1750KV motor is rated for 6S setups and lists key dimensions like 34.6g weight and 16.1mm length for fit planning.

The MAD BSC2306 V1.0 motor is rated at 1950KV and lists a 34.6g weight with up to 1.64kg of thrust in the provided performance tables.

Reviews

There are no reviews yet.

Be the first to review “MAD BSC2306 V1.0 FPV drone motor 1750KV/1950KV 6S, 12N14P, M5 nut, 4mm shaft, 150mm cable”