Description

SPECIFICATIONS

Brand Name: Readytosky

Choice: yes

For Vehicle Type: Airplanes

Hign-concerned Chemical: None

Is Electric: No battery

Material: Composite Material

Model Number: Mark4 V2 10inch Frame

Origin: Mainland China

Recommend Age: 14+y

Use: Vehicles & Remote Control Toys

Package Included:

1Set x Mark4 V2 10inch 427mm Carbon Fiber frame (unassembled)

4PCS x 3115 900KV Brushless Motor

1PCS x F7 Flight Control Board

1PCS x 60A BLheli_S 4In1 ESC (there are two kinds of esc board , will send at random )

2Pairs x 1050 3-blades Propeller

1PCS x Battery Strap

Mark4 V2 10Inch FPV Racing Drone kit includes F7+60A flight controller, 3115 900KV motors, and propellers.

Mark4 V2 10Inch 427mm Carbon Fiber Frame:

Parameters:

Frame structure: X-Type

Wheelbase: 427mm

Size: 268.18mm*332.07mm

Bottom plate thickness: 3.0mm

Medium plate thickness: 3.0mm

Upper plate thickness: 2.0mm

Arm thickness: 7.5mm

Connecting plate: 2.0mm

Camera side plate thickness: 2.5mm

Camera installation hole spacing: 19mm

Image transmission installation hole spacing: 20*20mm & 30.5*30.5mm

Flight control installation hole spacing: 20*20mm & 30.5*30.5mm

Inner space height: 35mm

Motor installation hole position: 16*16mm & 19*19mm

F7 Flight Controller Specifications:

MCU: STM32F722RET6 216MHz

Gyroscope: Mpu6500

Baro:Bmp280

OSD: Betaflight SPI OSD DJI HD OSD(UART5)

Black box: 16MB

6x Uarts: UART 1/2/3/4/5/6

4x PWM outputs

1x I2C

2x LEDs for FC STATUS (Blue) and 3.3V indicator(Red) and 5V indicator(Red) and 9V indicator(Red)

USB Type-C(USB2.0)

1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Curr/Rx3)

1x JST-SH1.0_6pin connector (9V/GND/T5/R5/GND/R2)

VTX 9V filtered power

DJI FPV OSD is supported by any spare UART

LED: 4 LED independent pads, support WS2812 programming lamp output.

Receiver: Support Sbus, crsf, ibus, SBUS, XBUS receiver,

The default receiver input is UART2(You can solder ELRS RX on UART2), F7 has a built-in inverter, which can actually be installed in any spare UART.

Power:

Input voltage: 3-6S

BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI

LDO 3.3V: Max.1A

FC Firmware:

BetaFlight firmware:DAKEFPVF722

INAV firmware:DAKEFPVF722

Mounting:

Installation size: 30.5mm 30.5mm The installation hole is M4 and supports shock column installation

External size 36mm 36mm

Flight control weight: 6.9g

Flight control onboard voltage sensor.

A Mark4 V2 FPV Racing Drone with a circuit board and multi-colored wires.

Mark4 V2 FPV Drone with compact circuit board, micro USB, GPIO pins, and components.

BLHeli-S 60A 3-6S DShot600 4-in-1 ESC:

Support Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal

Power supply voltage: 3-6S (12-26V)

Continuous working current: 60A

No built-in 5V BEC output

Firmware: BLHeli-S

Screw hole spacing: 30.5*30.5MM

Aperture: 4MM

Weight: 14.6g

– The ESC has an on-board filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.

– EMI Shell provides stronger anti-interference capability.

Note : there are two kinds of esc board , will send at random

Mark4 V2 FPV Racing Drone components: ESC, capacitor, wires, and connectors.

BLHELI-S ESC for FPV drones, 3-6S 60A, with connector markings.

3115 900kv Motor Description:

KV: KV900

Operating rated voltage (Lipo): 3-6S

RCD 3115-900KV motor specs: stator 31mm x 15mm, 12 arms, 14 poles, 900KV, 2.5A max no-load current, 60m resistance, 112g weight, 37.5mm diameter, 33.6mm length. Includes outside view diagram with dimensions.

Specifications for a 3115-900KV motor with 1050 propeller compatibility include PWM, voltage, current, thrust, torque, RPM, temperature, power consumption, efficiency, and thrust-to-power ratio. Customization options are color, engraving, KV value, and cable length.

rcdrone.top. All rights reserved.