Mikado Power Backup, VBar Control : 05584

Description

Mikado Power Backup, VBar Control : 05584

Benefits at a glance

• automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
• all voltages can be monitored separately via telemetry
• charging currents are adjustable, both for initial charging and for topping-up during operation
• recharges automatically and immediately whenever needed
• companion App warns the pilot whenever the backup is used
• this unit ensures the everyday operation of your valuable models

Hardware features

• wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
  40+ A peak current
• short circuit protection
• fast charge (adjustable) up to 2.4 A
• charging current is ramped up slowly, to protect main power supply
• decoupled channels for power delivery and for charging
• VLink Telemetry monitoring and control
• no r/c channel (servo connector) must be sacrificed, pass-through via main connector
  active balancer between capacitors for low idle discharge
• up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully supported by companion App
• telemetry input for other sensors or ESCs (daisy-chaining)

Specification

• Power Supply : 3-12.6 V (3s LiPo), max. 16 V
• Dimensions : approx. 48 x 55 x 19 mm (H x W x D)
• Weight : approx. 52 g including wires
• Power Rating : Capacity 3 x 50 F, 40+ A peak

Contents

• VBar Control Power Backup w/ power wire, manual
• Telemetry wire included
• Update VBar NEO, install companion App on transmitter