MP05 brushless motor 1304 motor for mini airplanes wings 120g thrust on 2S RX62HE-A2 FlySky 2A TELEM receiver MP05 1 piece

Description

Description(MP05 motor)

Weight: 5.4g including cablessize:1304KV: 4000Plug: 1.5mm JST 3PThrust is 120g-150g with GWS5030mm prop at 2SIdle current:0.27A/7.4V 0.18A/3.7VAll the motors on the list will comes with a motor mount for freelike the following:Description for RX62HE-A2 FlySky AFHDS 2A receiver TELEM with 2S ESC:Ma-RX62HE-X series receivers were developed upon Ma-RX42E-X series receivers. with a built-in 7A/2S(5A/3S) brushless ESC and 6 independent servo ports on board. in this case. RX62HE-X receiver can provide more power and more channels to work on larger size or more complicated model planes. We can supply 8 versions in total with TELEM function.
Protocol: FlySky AFHDS 2A
Specification Super small size24.0*16.0*6.5mm(not including antenna) Super light)1.85g(not including power cables and motor connectors) Working voltage):7.4~11.1V Comes with a built-in 7A/2S or 5A/3S brushless ESC Built-in DCDC buck circuit(2.2A/3.9V) Supports double-aileron mode(reversed) Optimized binding process(DSMX/2) Auto binding; Supports TELEM function(only advanced version) 1.0mm 3P servo connectors;
Ports

MP05 brushless motor with crossover RX module. featuring AIL1. RUD. AUX1. AIL2 (AUX2). ELE. VIN 7.4~11.1V connections.

Double-aileron modeDouble-aileron mode is developed for those model airplanes using double ailerons. This function can simplify servo wiring connection and transmitter set up. Default is double-aileron mode. you can turn off double-aileron mode by short connect P ports on the above picture. then AIL2 will be set as AUX2 output.Auto BindingAs it is difficult to reach the binding button when the receiver has been installed inside the plane. we developed self-binding function. it works like this: The receiver will enter binding mode automatically after powered and no signal for 15 seconds (slow flashing LED light turns to fast flashing). then complete the binding operation according to your transmitter binding manual.TELEM FunctionTELEM function is useful on monitoring battery voltage. receiver working voltage and its signal strength as well as its working temperature in real time. through which customer can get working state of receiver and battery discharging state under control. so flying out of control range and over discharging will rarely happen ( for brushless motor rotation speed or flight height monitoring. customer needs to choose a more advanced receiver) NOTE: The effective control range of TELEM function depends on transmitter. it is possible that this would happen: the working range of the receiver is far more than TELEM function effective range. it is normal and alright!

MP05 4000KV motor. RX62HE-A2 receiver. two props. prop saver; 125g pull.

Motor. receiver. ESC. prop. motor mount. and prop saver weigh 11 grams. Components displayed on a digital scale.

The above weight was added 3 pcs of 2.2g digital servo

druav.com. All rights reserved.