Ovonic 14.8V 850mAh 4S 80C Lipo Battery with XT30 Plug for 150 to 210mm FPV

Description

With the development of FPV, more and more hobbyists have joined this field, and more types of drones have been added, so more types of LiPo batteries have been added to meet this demand.
Ovonic 850mAh 4S XT30 lipo battery is one of them, this LiPo battery is specially designed for 150mm to 210mm size FPV, the same as Ovonic 850mAh 3S 80C. You can choose according to your drone’s voltage requirements.

And if your drone size is smaller, 650mah 4S 80C is available for 90mm to 150mm size FPV.

Spec of 4S 850mAh LiPo:

• Brand: Ovonic
• Chemistry: Li-polymer
• Configuration: 4S
• Voltage(V) : 14.8V
• Capacity(mAh):850mAh
• Discharge Rate: 80C
• Max Burst Discharge Rate: 160C
• Net Weight(dev.20g) : 103g (one pcs)
• Length(dev.5mm) : 60mm
• Width(dev.2mm) : 30mm
• Height(dev.2mm) : 30mm
• Charge Plug: JST-XHR
• Discharge Plug: XT-30 Plug

Please Notice:

1. For the RC battery, only if the voltage and the plug match, then it will fit.
2. Please stop charging immediately when the cell voltage has been charged to 4.2v (Normal cell voltage is between 3.7v~4.2v).
3. To double make sure of safety, please have a check first whether the battery surface is alright when you get it and whether the voltage is normal before using.
4. If the new battery wont hold a full charge or loss the charge very quickly in a short time, please use the Balance Charger to charge and recycle several times first.