SkyRC S100neo Smart Balance Battery Charger AC 100W/DC 200W 12A for 1-6S LiPo LiHV LiFe LiIon

Description

Overview

The SkyRC S100neo is an AC/DC smart balance battery charger designed for RC battery charging and related bench tasks. It supports up to 12A charge current with dual power input (AC 100240V, or DC 630V) and offers AC 100W max / DC 200W max charger power.

Key Features

• Dual input power: AC 100240V 50/60Hz; DC 630V
• Charger power: AC 100W max; DC 200W max
• Charge current: 0.112.0A (LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb)
• Discharge power: max 20W (based on 6S, 4.2V/S); discharge current 0.12.0A
• Balance current: LiPo/LiFe/LiIon/LiHV max 1000mA
• Battery support: LiPo/LiHV/LiFe/LiIon 16 cells; NiMH/NiCd 115 cells; Pb 3S/6S/12S
• Built-in balance port enables higher discharge power (up to 20W with balance port connected; main port alone limited to 5W)
• Digital Power (CC/CV Mode): adjustable 230V (0.1V increments) and 0.112A
• Brushed Motor Run-In mode
• Battery voltage meter (cell voltage display when balance port is connected)
• USB Type-C connection for PC/Mac (for use with Charger Master)
• ColorX interface with multi-language UI (English, Dutch, French, Chinese, Japanese)
• Cooling fan noise: maximum 48 dB (stated under full power load)
• Safety features shown: short-circuit, over-temperature, capacity, time-out, cut-off, over-voltage protections
• Thermal Cut-Off (when an optional temperature sensor is connected): currently available for NiMH/NiCd; optional temperature sensor cable SK-600040-01 is not included

For setup or compatibility questions (battery types, connectors, power sources), contact [email protected] or visit https://rcdrone.top/.

Specifications

Case material	PC-ABS V0
Case size	105*105*62mm
Weight	340g
Display type	TN
Display size	1.77 inch
Panel active area	28.03*35.04mm
Display resolution	128×160 Pixel
Number of colors	262K
DC input voltage	6-30V
AC input voltage	100-240V 50/60Hz
Charger power (AC)	100W MAX
Charger power (DC)	200W MAX
Discharge power	Max. 20W based on 6S (4.2V/S)
Battery types / cells	LiPo/LiHV/LiFe/LiIon: 1-6 cells; NiMH/NiCd: 1-15 cells; Pb: 3S/6S/12S
Charge current	LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb: 0.1-12.0A
Discharge current	LiPo/LiFe/LiIon/LiHV/NiMH/NiCd/Pb: 0.1-2.0A
Balance current	LiPo/LiFe/LiIon/LiHV: Max. 1000mA
Operations (LiPo/LiFe/LiIon/LiHV)	Balance charging, Charging, Discharging, Storage
Operations (NiMH/NiCd)	Charge, Discharge, Cycle charge-discharge, Cycle discharge-charge, Repeat charge
Operations (Pb)	Normal, Standard charge, Low-temperature charge, AGM charge/discharge
Add-on features	Digital Power (CC/CV Mode), Brushed Motor Run-In, Battery Voltage Meter

Performance Test Data (Stated)

• Charging time comparison (test data obtained from actual charging on the same LiPo 6S 1300mAh battery):
  • 200W (S100neo powered on DC): charge time about 10 mins
  • 100W (S100neo powered on AC): charge time about 20 mins
  • 80W (e680 powered on AC/DC): charge time about 25 mins
• Discharging time comparison (test data obtained from actual discharging on the same LiPo 6S 1300mAh battery):
  • 20W (S100neo discharging with balance port connected): discharge time about 1.5 hours
  • 10W (e680): discharge time about 3 hours

Applications

• Charging and balancing RC batteries (LiPo/LiHV/LiFe/LiIon, NiMH/NiCd, Pb)
• Battery checking via balance port (cell voltage and balance state display)
• Bench DC power supply use via Digital Power (CC/CV Mode)
• Brushed motor run-in for RC models

Details

The SkyRC S100neo supports up to 12A charging current to help speed up battery charging for RC use.

The SkyRC S100neo includes a motor run-in mode that varies speed to help tune brushed motors for smoother operation.

The SkyRC S100neo uses a single-output design with up to 100W on AC input or 200W on DC input for flexible charging setups.

SkyRC S100neo can also act as a digital power supply with 230V output in 0.1V steps and adjustable 0.112A current.

SkyRC S100neo charging and discharging time comparisons versus the e680 are summarized with power levels and relative speed multipliers.

The built-in balance port lets the S100neo discharge up to 20W when used with the main port, compared with 5W using the main port alone.

SkyRC S100neo charging features include a rectifier circuit and USB-C connectivity for linking to PC or Mac charging tools.

The SkyRC S100neo features a ColorX screen designed for clear, easy-to-read charging information.

CE, FCC, and RoHS compliance marks are provided for clear reference to the products certification status.

SkyRC S100neo provides a clear screen for checking individual cell voltage and balance status during battery maintenance.

SkyRC S100neo features a multilingual menu interface that makes it easier to set battery type, cell count, and charge settings.

SkyRC S100neo charging is promoted as quiet, with the ad calling out a 49 dB noise level for a calmer workbench.

SkyRC S100neo supports up to 1000mA cell balancing and is designed to charge multiple battery chemistries including LiPo, LiFe, LiIon, LHV, Pb, NiMH, and NiCd.

The SkyRC S100neo smart balance charger features Multi SafeCircuit protection, including short-circuit, over-temperature, time-out, and over-voltage safeguards.

SkyRC S100neo supports Battery Thermal Guardian with a thermal cut-off function when a temperature sensor is connected.

SkyRCs S100neo is presented as a 100W DC charger with up to 20A output and Constant Current/Constant Voltage charging modes.