T-Motor AT30A ESC for Fixed-Wing RC Aircraft, 2-3S LiPo Support, Programmable Brake/Cutoff/Timing

Description

Overview

The T-Motor AT30A is an ESC (electronic speed controller) designed for fixed-wing RC aircraft. It supports 2-3S LiPo batteries and provides programmable settings via audible tone (beep) prompts and throttle-stick input.

Key Features

• Supports 2-3S LiPo battery use.
• Tone-based programming with 8 selectable menu items.
• Adjustable operating parameters: brake, battery type, cutoff mode, cutoff threshold, start mode, and timing.
• Set all to default option and multiple ways to exit program mode.

Specifications

Model	AT30A
Battery support	2-3S LiPo
Programmable items	Brake; Battery type; Cutoff mode; Cutoff threshold; Startup mode; Timing; Set all to default; Exit
Programmable values	Brake: Off / On; Battery type: Lipo / NiMH; Cutoff mode: Soft-Cut / Cut-Off; Cutoff threshold: Low / Medium / High; Start mode: Normal / Soft / Super soft; Timing: Low / Medium / High

For product selection and setup support, contact [email protected] or visit https://rcdrone.top/.

Manuals

Select programmable items (tone sequence)

After entering program mode, 8 tones repeat in a loop. Move the throttle stick to bottom within 3 seconds after the desired tone to select that item:

• 1. beep = brake (1 short tone)
• 2. beep-beep = battery type (2 short tone)
• 3. beep-beep-beep = cutoff mode (3 short tone)
• 4. beep-beep-beep-beep = cutoff threshold (4 short tone)
• 5. beep—– = startup mode (1 long tone)
• 6. beep—–beep- = timing (1 long 1 short)
• 7. beep—–beep-beep- = set all to default (1 long 2 short)
• 8. beep—–beep—– = exit (2 long tone)

Note: 1 long beep—– = 5 short beep-. In Select Settings, a long and short beep-beep- indicates the 6th option, and so on.

Set item value (programmable value)

Several tones repeat in a loop. Set the value that matches the tone by moving the throttle stick to top when the tone is heard. A special tone 1515 indicates the value is set and saved.

Keeping the throttle stick at top returns to item selection (Step 2) to choose other items. Moving the stick to bottom within 2 seconds exits program mode directly.

Item	beep- (1 short tone)	beep-beep- (2 short tones)	beep-beep-beep (3 short tones)
Brake	Off	On
Battery type	Lipo	NiMH
Cutoff mode	Soft-Cut	Cut-Off
Cutoff threshold	Low	Medium	High
Start mode	Normal	Soft	Super soft
Timing	Low	Medium	High

Exit program mode

There are 2 ways to exit program mode:

1. In Step 3, after the special tone 1515, move the throttle stick to the bottom position within 2 seconds.
2. In Step 2, after tone beep—–beep—– (item #8), move the throttle stick to bottom within 3 seconds.

Details

The T-Motor AT30A ESC uses beep-tone programming to select items like brake, battery type, cutoff settings, start mode, and timing.