T-Motor VL6011 KV180 UAV Motor for VTOL UAVs – 12S, IPX5, Quick Propeller Locking, 10.1kg Thrust

Description

Overview

T-Motor VL6011 KV180 is a UAV Motor designed for VTOL UAV propulsion system integration. It supports fast and economical propeller locking, using a 360 custom-angle propeller-locking method intended to reduce turbulence impact and help maintain fixed-wing aerodynamic layout. An adaptive propeller-locking function allows the ESC to automatically adjust current and torque to reduce power consumption and heat for energy saving.

Key Features

• Fast propeller locking (locks the propeller in seconds)
• 360 custom-angle propeller-locking design
• Economical adaptive propeller locking via ESC current/torque adjustment
• IPX5 rating (motor)
• Centrifugal cooling design: Yes

Specifications

Recommendation

Voltage	12S
Max thrust/arm	10.5kg
Recommended MTOW (Quad)	15~18kg

Motor (VL6011)

Model No.	VL6011	KV (RPM/V)	180
Magnet level	180C	Rated voltage (LiPo)	12S
Motor size	Dia. 67.2*38.4mm	Motor weight (incl. cable)	300g
Lead cable	Silicone wire 16# 600mm	Idle current (15V)	1.1A
Stator	150C high temperature-resisting coatings	Copper wire	220C
Configuration	24N28P	Coil insulation test	1000V/5s
Shaft diameter	IN: 6; OUT: 4	Rotor dynamic balance standard	10mg
Bearing	Imported 696	Internal resistance (25C)	80m
IP rating	IPX5	Peak current	55A
Continuous power (180s)	2450W	Ambient temperature	-30C to 55C
Max. thrust	10.1kg	Centrifugal cooling design	Yes
Package size	126*103*51mm

ESC (V60A) specs.

Model No.	V60A	Control	PWM/CAN
Max. voltage	60V	Protocol	DRONE CAN/UAV CAN
Peak current (10s)	60A (under certain heat dissipation conditions)	Propeller-locking	Electronic propeller-locking
Continuous current	30A (under certain heat dissipation conditions)	Standby consumption	50mA
Throttle position range	1100-1940us (fixed)	Throttle refresh frequency	50~500Hz
Throttle response speed	300ms	Weight (incl. cables)	85g
Encoder cables	Shielded cables – Black – 24AWG – 5C – 30010mm – M6 aviation connector	Output cable	Silicone wire – orange – 16AWG – 6010mm
Input cable	Silicone wire – red/black – 14AWG – 16010mm	Signal cable	Shielded cables – Black – OD4.2 – 5C – 30010mm – JP-3P*2 – Black blank, white-green, yellow, gray

Prop specs.

Model No.	P22*6.6 inch (558.8*167.6mm)
Weight (single blade)	452g

Whats Included

• VL6011 motor x1
• Parts bag x1

Applications

• VTOL UAV propulsion system builds
• Fixed-wing UAV platforms requiring propeller-locking functionality
• Multirotor (quad) setups (refer to recommended MTOW and thrust guidance)

For compatibility questions (ESC control via PWM/CAN, DRONE CAN/UAV CAN) or order support, contact [email protected] or visit https://rcdrone.top/.

Downloads

• VL6011 3D Diagram
• VL6011 Propulsion System Specifications (PDF)
• TM-Link_V2.0 Upper Computer
• TM_UAVCAN_V2.3 CAN Communication (PDF)
• User Manual (PDF)

Details

T-Motor power components pair a VL6011 brushless motor with a carbon-fiber prop and a 60A 14S ESC for clean, compact wiring.

The T-Motor propeller features a sleek carbon-fiber weave finish for a clean, professional look on your build.

The T-Motor VL6011 motor comes with a mounting plate and screw set to help with installation and secure mounting.