T-Motor VL8022 KV170 VTOL UAV Motor w/ Quick-Lock Propeller System, V150A ESC, VZ29 29×11 Prop

Description

Overview

The T-Motor VL8022 KV170 is a VTOL UAV Motor designed for VL Series propulsion setups, combining fast, economical electronic propeller locking with a matched control ecosystem. The system is presented with V150A ESC and VZ29 propeller recommendations for VTOL/fixed-wing aerodynamic layouts.

Key Features

• Fast propeller locking: locks the propeller in seconds.
• 360 custom angle propeller locking: helps avoid turbulence caused by rotor rotation and helps keep the fixed-wing aerodynamic layout unaffected.
• Adaptive (economical) propeller locking: ESC automatically adjusts current to control locking torque as external force changes, reducing power consumption and heat for energy saving.
• Recommendation: 12S voltage; 22.2 kg max thrust/arm; 40 kg recommended MTOW (Quad).

Specifications

Motor (VL8022)

Model No.	VL8022	KV (RPM/V)	170
Magnet Level	180C	IP	IPX5
Motor Size	88.8*47.5mm	Package Size	150*120*57mm
Lead Cable	Silicone wire 13# 1000mm	Motor Weight (incl. cable)	785g
Stator	150C high temperature-resisting coatings	Copper Wire	220C
Configuration	24N28P	Coil Insulation Test	1000V/5s
Shaft Diameter	IN: 12 OUT: 10	Rotor Dynamic Balance Standard	10mg
Bearing	Imported 6901	Centrifugal Cooling Design	YES
Rated Voltage (LiPo)	12S	Idle Current (15V)	2.5A
Internal Resistance (25C)	30m	Peak Current	135A
Continuous Power (180s)	2100W	Ambient Temperature	-30C~55C
Max. Thrust	22.2kg

ESC (V150A)

Model No.	V150A	Control	PWM/CAN
Max. Voltage	60V	Protocol	DRONE CAN/UAV CAN
Peak Current (10s)	160A (Under certain heat dissipation conditions)	Propeller-locking	Electronic propeller-locking
Continuous Current	70A (Under certain heat dissipation conditions)	Standby Consumption	50mA
Throttle Pos. Range	1040~1940us (fixed)	Throttle Refresh Frequency	50~500Hz
Throttle Response Speed	300ms	Weight (incl. cables)	295g
Encoder cables	Shielded cables – Black – 24AWG – 5C – 40010mm – M6 aviation connector	Output Cable	Silicone wire – orange – 10AWG – 10010mm
Input Cable	Silicone wire – red/black – 10AWG – 13010mm	Signal Cable	Shielded cables – Black – OD4.2 – 5C – 46010 – JP – 3P*2 – Black blank white – green yellow gray

Propeller (VZ29)

Model No.

VZ29*11 inch (736.6*279.4mm)

Weight (Single Blade)

905g

Whats Included

• VL8022 x1
• Parts Bag x1

Applications

• VTOL and fixed-wing UAV propulsion setups requiring electronic propeller locking
• Multi-rotor configurations (recommendation: 40 kg MTOW for quad, 12S)

For pre-sales compatibility checks and support, contact [email protected] or visit https://rcdrone.top/.

Downloads

• VL8022 3D Diagram.rar
• VL8022 Propulsion System Specifications.pdf
• TM-Link_V2.0 Upper Computer
• TM_UAVCAN_V2.3 CAN Communication
• User Manual

Details

The T-Motor setup pairs a VL802 KV110 brushless motor with a 150A 14S ESC in a clean, compact layout.

The carbon-fiber two-blade propeller has a slim profile and a centered mounting hub for straightforward drone installation.

The VL8022 motor comes with a mounting plate and screw hardware for installation.