KST Servo Programming Tool Card #3 for KST Servos : KST-6003

Description

KST Servo Programming Tool Card #3 for KST Servos : KST-6003

KST Servo Programming Tool Card #3 A programming device for KST V3.0, V6.0 and V8.0 servos, it is a very useful tool that makes it possible to not only change the frequency of the servo but also to set the neutral position which likewise adjusts the full travel. This gives the ultimate perfect centring of the servo, a handy tool!

Compatible Servos

• KST V3.0, V6.0 and V8.0 Servos. NOTE: Not Suitable for KST DS215 V3.0

Operating instructions for KST Servo Programming Tool Card #3

• 1. Connect the device to a 6-9V power supply, and the frequency indicators will start to flash.
• 2. Connect the servo to the upper servo port. The device will detect the servo frequency and illuminate the corresponding frequency indicator light.
• 3. Setting the Servo Frequency: Press the toggle frequency button to switch between frequencies (1520uS / 760uS). Press enter to select the frequency of the servo in use. If you do not want to change the servo frequency you still need to press the Enter button to save the currently selected frequency and move to Center position setting.
• 4. Setting the Center Position: Use the dial to set the desired new centre position. Press Enter to save the new centre position.

Resetting to Factory setting: Press down on the Neutral set dial to reset the device to factory setting.

Package Includes

• Servo Programming Tool Card #3