(Motor+ESC+Remote) E-mountainboard electric skateboard kit MTSVESC6.0 200A VESC based ESC and brushless black sealed motor (battle-hardened) and Remote

Description

(Motor+ESC+Remote) E-mountainboard electric skateboard kit MTSVESC6.0 200A VESC based ESC and brushless black sealed motor (battle-hardened) and Remote

Price includes 1pcs ESC and 1pcs motor and 1pcs Remote
1.Specifications of MTSVESC6.0 200A ESC based on VESC6 speed controller:

Application	electric skateboard longboard/fighting robots combat robots/elctric surfboard
BEC	5V/1.5A
Lipo	3-12Cells
Voltage	8V-60V
Hardware version	based on VESC6.0
Firmware version	updatable
Cont. Current	200A
Burst Current	280A
Capacitors	With high quality aluminum case, better heat dissipation
Case Size	108mm(L)x75mm(W)x27mm(H)
Power wire	Silicon wire

2.Motor specificationsFirst Generation Maytech sealed cover HALL SENSOR Motor

Model No.	MTO6355-170-HA-C	MTO6365-170-HA-C	MTO6374-170-HA-C	MTO8085-160-HA-C
KV	170	170	170	160
Idle Current	1.0A	0.8A	0.8A	1.5A
Max. Current	65A	65A	65A	90A
Input Volt	2-12s Lipo	2-12s Lipo	2-12s Lipo	6-14s Lipo
Max. Output Watt	3510W	3520W	3550W	5330W
Max. Pull	12000g	9700g	13000g	15500g
Rated Current	55A	60A	60A	64A
Motor Weight	605g	760g	830g	1115g
Shaft	8mm	8mm	8mm	12mm
Output shaft length	26mm	26mm	26mm	44mm
Resistance	0.0441	0.0402	0.0402	0.0280

Second Generation Maytech sealed cover HALL SENSOR Motor

Model No.	MTO6355-170-HA-C2	MTO6365-170-HA-C2	MTO6374-170-HA-C2
KV	170	170	170
Idle Current	1.0A	0.8A	0.8A
Max. Current	65A	65A	65A
Input Volt	2-12s Lipo	2-12s Lipo	2-12s Lipo
Max. Output Watt	3510W	3520W	3550W
Max. Pull	12000g	9700g	13000g
Rated Current	55A	60A	60A
Motor Weight	610g	765g	860g
Shaft	10mm	10mm	10mm
Output shaft length	34mm	34mm	34mm
Resistance	0.0441	0.0402	0.0402

Third Generation Maytech sealed cover HALL SENSOR Motorwithextra big bearing (more durable)

Model No.	MTO6880-190-HA-C3	MTO6396-190-HA-C3
KV	190	190
Idle Current	0.8A	2A
Max. Current	65A	80A
Input Volt	2-12S Lipo	2-12S Lipo
Max. Output Watt	3550W	4550W
Max. Pull	13000g	13500g
Rated Current	60A	65A
Motor Weight	1200g	1280g
Shaft	10mm	10mm
Output shaft length	45.5mm	34mm
Resistance	0.0402	0.0200

3.Specification of MTSKR20WFV2 waterproof Remote controller with screen and receiver:

Model No.	MTSKR2005WF (MTSKR20WFV2)	Waterproof Rank	IP66
Control Mode	New Esk8	Application	Only for Electric skateboard, elongboard, mountainboard
Speed Display	Yes	Travel Mileage	Yes
Throttle and brake Display	100%	VESC Control Mode	Duty Cycle/ Current Mode
Speed Mode	3 speed modes, each mode can adjust speed from 1%-100% throttle	Accessories	Wireless charging pad; receiver; 3pcs dupont cable
Charger	QC 2.0 wireless	Wireless Frequency	2.4GHz wireless with 40 channels
Display Screen	OLED yellow & blue screen	Triggers	2x high senstive triggers
Throttle and Brake Signal Output Range	1.5ms-2ms for throttle; 1.5ms-1ms for brake	Telemeter Data by Receiver	Motor RPM; main battery voltage
Voltage Display	Remote & main battery voltage level (lithium iron; lithium ion battery optional)	Telemeter Data by VESC	ESC voltage/ current/ temp; Motor temp/ RPM
Compatible ESCs	VESCTOOL/ Focbox/ Other PWM ESCs that has same signal output range with the remote	Receiver Built-in Switch for Esk8 Light / Esurf Water Pump	1x 30V 3A mechanical relay switch; 1x 20V 2A transistor electronic switch